> PHOENIX CONTACT > INTERFACE Components (IF) > 2908747
PHOENIX CONTACT TC-XC96-AI32-2EX-PS-HIMAX01 TC-XC96-AI32-2EX-PS-HIMAX01 2908747 PHOENIX CONTACT Termination Carrier for connecting 16 two-channel MACX A.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

TC-XC96-AI32-2EX-PS-HIMAX01 2908747 PHOENIX CONTACT Termination Carrier for connecting 16 two-channel MACX A..

TC-XC96-AI32-2EX-PS-HIMAX01

2908747

PHOENIX CONTACT

1 Pcs.

Termination Carrier for connecting 16 two-channel MACX Analog Ex i signal conditioners to analog input cards of the HIMA HIMax controller, via one C96 connector, 96-pos. Suitable for the HIMax X-AI 32 01 card, with HART multiplexer connection Termination Carrier for the connection of 16 MACX Analog Ex-i two-channel separation amplifiers to analog input cards of the HIMA-HIMax control system, via a C96, 96-pole connector. Suitable for HIMax X-AI 32 01 card, with HART multiplexer connection

Automation > Interface module
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Order information:2318457 VIP-CAB-FLK14-0,14/... :
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Utilization restriction
EMC noteEMC: class A product, see manufacturer's declaration in the download area
Product properties
Product typeModule carrier
Data management status
Article revision07
Insulation characteristics: Air clearances and creepage distances
InsulationBasic insulation
Overvoltage categoryII
Pollution degree2
Electrical properties
Max. permissible current1 A (Signal/channel)
Nominal voltage UN< 50 V DC (Per signal/channel)
Air clearances and creepage distances
Rated insulation voltage30 V
Rated surge voltage0.5 kV
Supported controller HIMA HIMax
Suitable I/O cardX-AI 32 01
Supply
DesignationDevice supply
Fuse2x 2.5 A Slow-blow (exchangeable)
Input voltage24 V DC
Input voltage range19.2 V DC ... 30 V DC
Input current≤ 2 A
Redundant supplyyes, decoupled from diodes
Polarization and surge protectionYes
Output nameSwitching output
Contact switching type1 N/C contact (alarm = open)
Maximum switching voltage30 V DC (2 A)
Connection data
Power supply
Connection methodScrew connection
Stripping length7 mm
Number of connections1
Number of positions6
Conductor cross section rigid0.75 mm² ... 2.5 mm²
Conductor cross section flexible0.75 mm² ... 2.5 mm²
Conductor cross section AWG18 ... 14
Controller level
Connection in acc. with standardIEC 60603-2
Connection methodPin strip
TypeC
Number of connections1
Number of positions96
Connection methodIDC/FLK pin strip
Number of connections1
Number of positions14
Signaling
Status display2x green LEDs (PWR1 and PWR2)
Dimensions
Width242 mm
Height170 mm
Depth159.5 mm
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Shock15g, according to IEC 60068-2-27
Vibration (operation)2g, according to IEC 60068-2-6
Approvals
ATEX
Identification II 3 G Ex ec IIC T4 Gc X
UKCA Ex (UKEX)
Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIF21UKEX2908746X
UL, USA/Canada
IdentificationUL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC
Standards and regulations
Air clearances and creepage distances
Standards/regulationsEN 60664-1
Directive 2014/35/EU (EMV)
Standards/regulationsEN 6100-6-2
EN 6100-6-4
Directive 2014/34/EU (ATEX)
Standards/regulationsEN 60079-0
EN 60079-7
EN 60079-11
Mounting
Mounting typeDIN rail mounting
Assembly noteNo end clamp
Mounting positionvertical, horizontal

ETIM for 2908747 PLC's (EC002780)
Feature Name Feature Value
Number of poles (EF001391) 96
Rated voltage (EF000228) 50 V
Rated current (EF000227) 1 A
Depth (EF000049) 159.5 mm
Width (EF000008) 242 mm
Height (EF000040) 170 mm
Mounting method (EF000003) DIN rail (top hat rail) 35 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.