> PHOENIX CONTACT > Field Device Connectors (FDC) > 1618451
PHOENIX CONTACT ST-3ES1N8AQ006S ST-3ES1N8AQ006S 1618451 PHOENIX CONTACT Plug-in connector coupling, straight, Locking SPEEDCON, M17, number .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

ST-3ES1N8AQ006S 1618451 PHOENIX CONTACT Plug-in connector coupling, straight, Locking SPEEDCON, M17, number ..

ST-3ES1N8AQ006S

1618451

PHOENIX CONTACT

1 Pcs.

Plug-in connector coupling, straight, Locking SPEEDCON, M17, number of poles: 3+PE, type of contact: Socket, Connection set, range of cable diameter: 5 mm ... 8 mm Plug-in coupling connector, straight, Standard lock and SPEEDCON M17, M17, number of poles: 3+PE, contact type: Female, shielded: yes, protection index: IP67, cable diameter range: 5 mm ... 8 mm, number of poles: 4, connection type: Crimped connection, series: ST Panel feed-through, straight, M17 standard and SPEEDCON locking, M17, number of positions: 3+PE, contact connection type: Socket, shielded: yes, cable diameter range: 5 mm ... 8 mm, number of positions: 4, connection method: Crimp connection, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1243214

Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product typeCircular connectors (device side)
SeriesST
ApplicationPower
Number of positions4
Connection profile3+PE
Shieldedyes
CodingN
Thread typeM17
Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Housing materialGD-Zn
Housing materialGD-Zn
Insulator materialPA 6.6
Gasket and O-ring materialFPM
Electrical properties
Contact
Contact diameter2 mm
Max. current25 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact
Contact diameter2 mm
Connection data
Conductor connection
Connection methodCrimp connection
Contact connection typeSocket
Connector
Typestraight
Direction of rotationStandard
Cable/line
External cable diameter5 mm ... 8 mm
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
IP44 (panel feed-through)
Ambient temperature (operation)-40 °C ... 125 °C
Ambient temperature (storage/transport)15 °C ... 25 °C
Permissible humidity (storage/transport)50 % ... 65 %

ETIM for 1618451 Connectors (EC003569)
Feature Name Feature Value
With shield connection (EF002535) Yes
Number of poles (EF001391) 4
Number of control contacts (EF012217) 4
With PE-connection (EF005600) No
Housing material (EF001596) Other
Inflammability class of insulation material according to UL94 (EF002521) V0
Degree of protection (IP), mounted (EF007466) IP67
Ambient temperature (EF002386) 125 °C
Operating temperature (EF002393) -40 °C
With thread (EF003723) Yes

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.