> PHOENIX CONTACT > Field Device Connectors (FDC) > 1125908
PHOENIX CONTACT SH-04SPC5_INSULATION BODY SH-04SPC5 INSULATION BODY 1125908 PHOENIX CONTACT Insulator for data element, SH and SB series, 4 poles, con.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SH-04SPC5 INSULATION BODY 1125908 PHOENIX CONTACT Insulator for data element, SH and SB series, 4 poles, con..

SH-04SPC5_INSULATION BODY

1125908

PHOENIX CONTACT

100 Pcs.

Insulator for data element, SH and SB series, 4 poles, contact connection type: male and female connector. Note: the article can only be used in the corresponding PxC products SH-8EPC5..., SH-8ESC5..., SB-8EPC..., SB-8ESC... Data Element Insulator, SH & SB Series, 4 Poles, Contact Type: Male & Female Connector. Note: the item can only be used on the corresponding PxC products SH-8EPC5..., SH-8ESC5..., SB-8EPC..., SB-8ESC... Insulating body for data element, SH and SB series, 4-pole, contact connection type: plug and socket. Note: The item can only be used in the related PxC products SH-8EPC5..., SH-8ESC5..., SB-8EPC..., SB-8ESC...

Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety Warning
Safety instructionsWARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property.
• WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired.
• WARNING: Have the product installed and operated only by qualified electrical personnel in accordance with the following safety instructions. Specialists must be familiar with the basics of electrical engineering and must be able to recognize and avoid hazards. The corresponding symbol on the packaging indicates that the intervention of qualified electrical personnel is required.
• The products are suitable for the areas of system assembly, control and assembly of electrical appliances.
• When operating the connector outdoors, these environments must be protected from environmental influences.
• Packaged products must not be handled or opened incorrectly.
• Only use plugs specified in the standards specified in the technical data (e.g. those listed in the product accessories on the phoenixcontact.com/products website).
• If you use the product directly in conjunction with third-party products, you are entirely responsible for this.
• For operating voltages > 50 VAC, conductive connector housings must be grounded
• Make sure that the protective or operating ground is properly engaged.
• For bundling different electrical circuits in a cable and/or connector, VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 apply
• Use only the tool recommended by Phoenix Contact
• Observe the installation instructions/Design In documents for the product in the download area on the web at phoenixcontact.com/products.
• Use the connector only in the fully engaged and locked state.
• Make sure that the tensile load does not exceed the limits set by the standard when laying the cable.
• Take into account the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector will become warm during normal operation. Depending on environmental conditions, the surface of the connector may be continuously heated. In this case, the user is responsible for the application of the safety instructions (e.g. DIN EN ISO 13732-1:2008-12).
Article features
ApplicationHybrid
Thread typeM23

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.