> PHOENIX CONTACT > Field Device Connectors (FDC) > 1524603
PHOENIX CONTACT SH-04PC5_CONTACT CARRIER SH-04PC5 CONTACT CARRIER 1524603 PHOENIX CONTACT Contact holder for data element, SH and SB series, 4 poles,.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SH-04PC5 CONTACT CARRIER 1524603 PHOENIX CONTACT Contact holder for data element, SH and SB series, 4 poles,..

SH-04PC5_CONTACT CARRIER

1524603

PHOENIX CONTACT

100 Pcs.

Contact holder for data element, SH and SB series, 4 poles, contact connection type: male, crimp connection. Note: the item can only be used on the corresponding PxC products SH-8EPC5..., SB-8EPC... Contact carrier for data element, series SH and SB, 4-pos., type of contact: pin, crimp connection.Note: The item may only be used in the corresponding PxC products SH-8EPC5..., SB-8EPC...

Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
ApplicationHybrid
Thread typeM23

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.