> PHOENIX CONTACT > Field Device Connectors (FDC) > 1426128
PHOENIX CONTACT SACC-DSI-M12MS-8CON-M16/0,5 SHS SACC-DSI-M12MS-8CON-M16/0,5 SHS 1426128 PHOENIX CONTACT Flush-type connector SACC-DSI-M12MS-8CON-M16/0,5 SHS.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-DSI-M12MS-8CON-M16/0,5 SHS 1426128 PHOENIX CONTACT Flush-type connector SACC-DSI-M12MS-8CON-M16/0,5 SHS..

SACC-DSI-M12MS-8CON-M16/0,5 SHS

1426128

PHOENIX CONTACT

1 Pcs.

Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 SHS - 1426128 Mounting male incorporated. p/ sensors/actuators, 8 poles, SPEEDCON M12, rear wall mounting/bolted mounting, with M16 thread, with 0.5 m TPE twisted wire, 8 x 0.25 mm² Incorp. mounting tap for sensors/actuators, 8 poles, SPEEDCON M12, rear wall mounting/bolt mounting, with M16 thread, with 0.5 m TPE braided wire, 8 x 0.25 mm2

Connectors > Sensor-actuator connector chassis
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Sensor/actuator flush-type plug, 8-pos., M12 SPEEDCON, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm²

Key Commercial Data

Orderkey1426128
Packing unit1
GTIN4055626473079
Custom tariff number85444290

Dimensions

Length of cable0.5 m

Ambient conditions

Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
Degree of protectionIP67
IP67

General

NoteThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Rated current at 40°C2 A
Rated voltage30 V
Rated surge voltage0.8 kV
Number of positions8
Insulation resistance≥ 100 MΩ
CodingA - standard
Standards/regulationsM12 connector IEC 61076-2-101
Signal type/categoryUniversal
Status displayNo
Overvoltage categoryII
Degree of pollution3
Connection methodIndividual wires
Insertion/withdrawal cycles> 100
Torque3 Nm ... 4 Nm (Installation-side)
Mounting typeRear mounting M16 x 1.5 With flat nut

Material

Flammability rating according to UL 94V0
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material, knurlsZinc die-cast, nickel-plated
Sealing materialFKM

Cable

Cable typeTPE litz wire
Conductor cross section0.25 mm²
AWG signal line24
Conductor structure signal line14x 0.15 mm
Core diameter including insulation1.15 mm ±0.07 mm
Thickness, insulation0.21 mm
Wire colorsBrown, blue, white, gray, pink, red, yellow, green
Material conductor insulationTPE
Conductor materialTin-plated Cu litz wires
Standards/specificationsM12 connector IEC 61076-2-101
Insulation resistance≥ 20 MΩ*km
Conductor resistance≤ 80 mΩ/m
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)

Standards and Regulations

Standard designationM12 connector
Standards/regulationsIEC 61076-2-101
Flammability rating according to UL 94V0

Environmental Product Compliance

REACh SVHC
Lead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

eCl@ss

eCl@ss 8.027440103
eCl@ss 9.027440102

ETIM

ETIM 5.0EC002061
ETIM 6.0EC002061

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.