> PHOENIX CONTACT > Field Device Connectors (FDC) > 1420017
PHOENIX CONTACT SACC-DSI-M12FS-4CON-M16/4,5 SACC-DSI-M12FS-4CON-M16/4,5 1420017 PHOENIX CONTACT Flush-type connector SACC-DSI-M12FS-4CON-M16/4,5 1420017 View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-DSI-M12FS-4CON-M16/4,5 1420017 PHOENIX CONTACT Flush-type connector SACC-DSI-M12FS-4CON-M16/4,5 1420017

SACC-DSI-M12FS-4CON-M16/4,5

1420017

PHOENIX CONTACT

50 Pcs.

Flush-type connector - SACC-DSI-M12FS-4CON-M16/4,5 - 1420017 Female mounting incorporated. p/ sensors/actuators, 4 poles, SPEEDCON M12, rear wall mounting/bolted mounting, M16 thread, TPE twisted wire 0.5 m, 4 x 0.34 mm² Sensor/actuator flush-type socket, 4-pos., M12 SPEEDCON, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 4 x 0.34 mm2

Connectors > Sensor-actuator connector
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Mounting
Mounting typeRear mounting M16 x 1.5 With flat nut
Assembly noteWith flat nut
Product properties
Product typeCircular connectors (device side)
Sensor typeUniversal
Number of positions4
No. of cable outlets1
Shieldedno
CodingA
Insulation characteristics
Overvoltage categoryII
Degree of pollution3
Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated
Conductor materialTin-plated Cu litz wires
Electrical properties
Rated surge voltage2.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN250 V
Nominal current IN4 A
Max. conductor resistance57.6 mΩ/m
Connection data
Conductor connection
Connection methodIndividual wires
Tightening torque3 Nm ... 4 Nm (Installation-side)
Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100
Connector
Connection 1
Head designSocket
Head thread typeM12
CodingA
Cable/line
Cable length0.5 m
Cable typeTPE litz wire
Signal type/categoryUniversal
Wire diameter incl. insulation1.2 mm ±0.07 mm
Single wire, colorbrown, white, blue, black
Cable cross section0.34 mm²
Conductor materialTin-plated Cu litz wires
Conductor structure signal line7x 0.25 mm
AWG signal line22
Material wire insulationTPE
Thickness, insulation0.21 mm (Core insulation)
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Cable resistance≤ 57.6 mΩ/m
Cable insulation resistance≥ 20 MΩ*km
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)
Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.