View larger
SACC-CIP-M8FS-4P SMD SH TX
1308262
PHOENIX CONTACT
60 Pcs.
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
| General | The electrical and mechanical values listed require a pair of plug-in connectors that are properly assembled and locked. If the plug-in connector is unlocked and there is a danger of contamination, the plug-in connector must be closed with a cap > IP54. In addition, influences by conductors, lines, or assembly of printed circuit boards must be considered. |
| Product Type | Contact Insert |
| Number of poles | 4 |
| application | Signal |
| Sealing gasket is available | Yes |
| Shielded | Yes |
| Codification | to |
| Thread Type | M8 |
| Insulation Properties | |
| Surge Category | Iii |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 48 V AC |
| 60 V DC | |
| Nominal Current IN | 4 A |
| Connection type | SMD Reflux |
| AWG Conductor Section | (Converted according to IEC) |
| Flammability class according to UL 94 | V0 |
| Gasket material | FKM |
| Contact material | CuZn |
| Material: Contact Surface | Au |
| Contact Support Material | PA |
| Connection 1 | |
| Header construction | Female Connection |
| Header cable outlet | straight |
| Header thread type | M8 |
| Codification | to |
| Mechanical data | |
| Plug Cycles | > 100 |
| Environmental conditions | |
| Degree of protection (plugged in) | IP67 (Plugged in and locked correctly) |
| Protection Index | IP67 |
| Ambient Temperature (Service) | -25 °C ... 105°C (male/female) |
| -40 °C ... 105 °C (without mechanical drive) | |
| Denomination of standard | M8 plug-in connector |
| Rules/Provisions | IEC 61076-2-104 |
| Type of mounting | Printed circuit board mounting |
| Connection type | SMD Reflux |
| Type of packaging | Tray |