> PHOENIX CONTACT > Industrial Relays > 1078802
PHOENIX CONTACT RIF-1-RPT-LDP-12DC/1IC RIF-1-RPT-LDP-12DC/1IC 1078802 PHOENIX CONTACT Pre-assembled relay module with Push-in connection, consistin.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

RIF-1-RPT-LDP-12DC/1IC 1078802 PHOENIX CONTACT Pre-assembled relay module with Push-in connection, consistin..

RIF-1-RPT-LDP-12DC/1IC

1078802

PHOENIX CONTACT

10 Pcs.

Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, retaining bracket. Contact type: 1 N/O contact, max. switch-on current up to 130 A peak, 80 A (20 ms), 12 V DC input voltage Pre-assembled relay module with push-in connection, consisting of: relay socket, relay with power contact, plug-in indication/antiparasitic module and clamping flange. Contact type: 1 normally open contact, max. input current up to 130 A peak, 80 A (20 ms) input voltage 12 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey1078802
Packing unit1
Catalog pagePage 334 (C-5-2019)
GTIN4055626796321
Custom tariff number85364110

Drawings

Diagram

Diagram
Curve A
Maximum permissible continuous voltage Umaxwith limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uopafter pre-excitation (see relevant technical data)

Diagram

Diagram
Contact derating

Circuit diagram

Circuit diagram

Back to top

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area
Type of noteNotes on operation
NoteFBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Back to top

Dimensions

Width16 mm
Height96 mm
Depth75 mm
Back to top

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Degree of protectionRT II (Relay)
IP20 (Relay base)
≥ IP54 (Installation location)
Back to top

Coil side

Nominal input voltage UN12 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN34 mA
Typical response time8 ms
Typical release time10 ms
Coil voltage12 V DC
Protective circuitFree-wheeling diode Damping diode
Operating voltage displayYellow LED
Power dissipation for nominal condition0.41 W
Back to top

Contact side

Contact type1 N/O contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage12 V AC/DC (at 100 mA)
Min. switching current100 mA (at 12 V DC)
Maximum inrush current80 A (for 20 ms)
130 A (peak, at capacitive load, 230 V AC, 24 μF)
Limiting continuous current6 A
10 A (Value is permissible if connections 11 and 21, as well as connections 14 and 24 are bridged.)
Interrupting rating (ohmic load) max.264 W (at 24 V DC, observe contact derating)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
2750 VA (at 250 V AC, observe contact derating)
Switching capacity min.1200 mW
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Back to top

General

Test voltage relay winding/relay contact4 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service life3x 107cycles
Mounting positionany
Assembly instructionsIn rows with zero spacing
Back to top

Connection data

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
26 ... 16 (flexible)
Back to top

Connection data 2

Connection nameContact side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
26 ... 16 (flexible)
Back to top

Standards and Regulations

DesignationStandards/regulations
Standards/regulationsEN 50178
EN 61810-1
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Pollution degree2
Overvoltage categoryIII
Back to top

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Articles in set

Relay base RIF-1-BPT/2X21 2900931

auawohwjkv.jpeg

RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5

Single relay REL-MR- 12DC/1IC 2904475

jphjxjjxvz.jpeg

Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 12 V DC

Plug-in module RIF-LDP-12-24 DC 2900939

fydmqrygls.jpeg

Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %

Retaining bracket RIF-RH-1 2900953

ebufagpwpm.jpeg

Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay

Back to top

Classifications

eCl@ss

eCl@ss 8.027371601
eCl@ss 9.027371601
Back to top

ETIM

ETIM 5.0EC001437
ETIM 6.0EC001437
ETIM 7.0EC001437
Back to top

ETIM for 1078802 Relays (EC001437)
Feature Name Feature Value
Type of electric connection (EF003961) Other
Complete with socket (EF003359) Yes
With detachable clamps (EF003340) No
With LED indication (EF005950) Yes
Rated control supply voltage DC (EF003980) 9.6 V
Voltage type for actuating (EF008242) DC
Drive, polarization (EF003355) Polarized
Drive, switching attitude (EF003356) Mono stable
Number of contacts as normally closed contact (EF008255) 0
Number of contacts as normally open contact (EF008256) 1
Number of contacts as change-over contact (EF008257) 0
Type of switch contact (EF003358) Single contact
With forced-guided contacts (EF003357) No
Material of contact insert (EF008521) Other
Material of contact surface (EF004020) Untreated
Nominal current (EF000001) 0.034 A
Degree of protection (IP) (EF005474) IP20
Width (EF000008) 16 mm
Height (EF000040) 96 mm
Depth (EF000049) 75 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.