> PHOENIX CONTACT > Industrial Relays > 2964500
PHOENIX CONTACT DEK-REL-G24/21 DEK-REL-G24/21 2964500 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

DEK-REL-G24/21 2964500 PHOENIX CONTACT Relay Module

DEK-REL-G24/21

2964500

PHOENIX CONTACT

1 Pcs.

Relay Module Borne-relay, with soldered miniature power relays, contacts (AgSnO): Medium to large powers, 1 switched contact, input voltage 24 V DC, for installation on NS 35/7.5, terminal width 6.2 mm Relay terminal, with soldered-in miniature power relay, contacts (AgSnO): medium to high loads, 1 changeover contact, input voltage 24 V DC, for mounting on NS 35/7,5, terminal width 6.2 mm

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Note on applicationUse of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.
Product properties
Product typeRelay Module
Product familyDEK
ApplicationUniversal
Operating mode100% operating factor
Mechanical service lifeapprox. 107cycles
Data management status
Date of last data management02.05.2024
Article revision11
Insulation characteristics
InsulationSafe isolation: Control side / contact side
Overvoltage categoryIII
Pollution degree2
Electrical properties
Maximum power dissipation for nominal condition0.22 W
Test voltage (Winding/contact)4 kV AC (50 Hz, 1 min., winding/contact)
Rated insulation voltage250 V
Rated surge voltage6 kV
Input data
Coil side
Nominal input voltage UN24 V DC
Input voltage range19.2 V AC/DC ... 26.4 V AC/DC (20 °C)
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN9 mA
Typical response time8 ms
Typical release time5 ms
Protective circuitReverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Operating voltage displayYellow LED
Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V AC/DC
Limiting continuous current6 A
Maximum inrush current10 A (4 s)
Min. switching current10 mA
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection data
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14
Tightening torque0.5 Nm
Dimensions
Width6.2 mm
Height80 mm
Depth56 mm
Material specifications
Colorgreen (RAL 6021)
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Standards and regulations
Standards/regulationsIEC 60947-5-1
Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.