> PHOENIX CONTACT > Industrial Relays > 2907027
PHOENIX CONTACT REL-OR3/LDP-220DC/3X21 REL-OR3/LDP-220DC/3X21 2907027 PHOENIX CONTACT Single relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

REL-OR3/LDP-220DC/3X21 2907027 PHOENIX CONTACT Single relay

REL-OR3/LDP-220DC/3X21

2907027

PHOENIX CONTACT

10 Pcs.

Single relay Plug-in octal relay with power contacts, 3 inverters, test button, indication of the mechanical switching position, coil voltage: 220VDC, actuation voltage at 23°C without pre-excitation ≥60% ... 80% of the assigned voltage (≥132VDC... ≤176VDC)

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey2907027
Packing unit10 pc
Catalog pagePage 322 (C-5-2017)
GTIN4055626159959
Weight per Piece (excluding packing)92.000 g
Custom tariff number85364900
Country of originPL (Poland)

Dimensions

Width35 mm
Height35 mm
Depth54.4 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN220 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN8 mA
Typical response time18 ms
Typical release time7 ms
Protective circuitDamping diode
Status displayYellow LED
Power dissipation for nominal condition1.76 W

Contact side

Contact type3 PDTs
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage10 V (At 24 mA)
Min. switching current10 mA (at 24 V)
Maximum inrush current30 A (20 ms, N/O contact)
Limiting continuous current10 A
Interrupting rating (ohmic load) max.240 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
2500 VA (for 250 V AC)
Switching capacity min.0.24 W
Switching capacity2 A (at 24 V, DC13)
1.5 A (at 230 V, AC15)

General

Test voltage relay winding/relay contact2.5 kVrms(50 Hz, 1 min.)
Test voltage PDT/PDT2 kVrms(50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT I
Mechanical service life1x 107cycles, approximately
Mounting positionany
Net weight (SAP)92 g

Standards and Regulations

Standards/regulationsIEC 60664
IEC 61810
Rated insulation voltage250 V AC
Rated surge voltage4 kV
InsulationBasic insulation
Degree of pollution3
Overvoltage categoryIII

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


ETIM for 2907027 Relays (EC001437)
Feature Name Feature Value
Type of electric connection (EF003961) Plug-in connection
Complete with socket (EF003359) No
With detachable clamps (EF003340) No
With LED indication (EF005950) Yes
Rated control supply voltage DC (EF003980) 187 V
Voltage type for actuating (EF008242) DC
Drive, polarization (EF003355) Polarized
Drive, switching attitude (EF003356) Mono stable
Number of contacts as normally closed contact (EF008255) 0
Number of contacts as normally open contact (EF008256) 0
Number of contacts as change-over contact (EF008257) 3
Type of switch contact (EF003358) Single contact
With forced-guided contacts (EF003357) No
Material of contact insert (EF008521) Other
Material of contact surface (EF004020) Untreated
Nominal current (EF000001) 0.008 A
Degree of protection (IP) (EF005474) Other
Width (EF000008) 35 mm
Height (EF000040) 35 mm
Depth (EF000049) 54.4 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.