> PHOENIX CONTACT > Industrial Relays > 1081621
PHOENIX CONTACT REL-MR-110DC/1IC REL-MR-110DC/1IC 1081621 PHOENIX CONTACT Pluggable miniature power relay, with power contact for high switch.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

REL-MR-110DC/1IC 1081621 PHOENIX CONTACT Pluggable miniature power relay, with power contact for high switch..

REL-MR-110DC/1IC

1081621

PHOENIX CONTACT

10 Pcs.

Pluggable miniature power relay, with power contact for high switch-on currents up to 130 A peaks, 1 N/O contact, input voltage: 110 V DC Plug-in miniature power relay, with power contact for high input currents up to 130 A Peak, 1 normally open contact, input voltage 110 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey1081621
Packing unit1
GTIN4055626810317
Custom tariff number85364900

Drawings

Drilling diagram

Drilling diagram
a = pitch division 2.5 mm

Diagram

Diagram
Curve A
Maximum permissible continuous voltage Umaxwith limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uopafter pre-excitation (see relevant technical data)

Dimensional drawing

Dimensional drawing

Circuit diagram

Circuit diagram

Back to top

Dimensions

Width12.7 mm
Height29 mm
Depth15.7 mm
Back to top

Ambient conditions

Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Degree of protectionRT II
Back to top

Coil side

Nominal input voltage UN110 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN3.8 mA
Typical response time8 ms
Typical release time3 ms
Coil resistance28880 Ω ±10 % (20 °C)
Power dissipation for nominal condition0.42 W
Back to top

Contact side

Contact type1 N/O contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V (100 mA)
Min. switching current100 mA (at 12 V DC)
Maximum inrush current80 A (20 ms)
130 A (peak, at capacitive load, 230 V AC, 24 μF)
Limiting continuous current16 A
Interrupting rating (ohmic load) max.384 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
4000 VA (for 250 V AC)
Switching capacity min.1200 mW
Back to top

General

Test voltage relay winding/relay contact5 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service life3x 107cycles
Mounting positionany
Assembly instructionsCan be aligned without spacing (> 70 °C ≥ 2.5 mm)
Back to top

Standards and Regulations

Standards/regulationsEN 50178
EN 61810-1
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Pollution degree3
Overvoltage categoryIII
Back to top

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 8.027371601
eCl@ss 9.027371601
Back to top

ETIM

ETIM 5.0EC001437
ETIM 6.0EC001437
ETIM 7.0EC001437
Back to top

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.