> PHOENIX CONTACT > Field Device Connectors (FDC) > 1196770
PHOENIX CONTACT PV-FT-C3M-C-2,5-4-VPE50 PV-FT-C3M-C-2,5-4-VPE50 1196770 PHOENIX CONTACT Crimp contact, Article family: SUNCLIX, number of poles: 1, .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PV-FT-C3M-C-2,5-4-VPE50 1196770 PHOENIX CONTACT Crimp contact, Article family: SUNCLIX, number of poles: 1, ..

PV-FT-C3M-C-2,5-4-VPE50

1196770

PHOENIX CONTACT

50 Pcs.

Crimp contact, Article family: SUNCLIX, number of poles: 1, min. conductor cross-section: 2.5 mm², max. conductor cross-section: 4 mm², rated current: 27 A, Connection type: Crimping, Contact connection type: Male Crimp Contact, Item Family: Sunclix, Pole Number: 1, Min. Conductor Cross-Section: 2.5 mm², Max. Conductor Cross-Section: 4 mm², Rated Current: 27 A, Connection Type: Crimp, Contact Connection Type: Male Crimp contact, Product series: Sunclix, number of poles: 1, Min. conductor cross-section: 2.5 mm2, Max. conductor cross-section: 4 mm2, Rated current: 27 A, Connection type: Crimping, Contact connection type: Plug

Connectors > Contact for industrial connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety Warning
Safety instructions• WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired.
• WARNING: Have the product installed and operated only by qualified electrical personnel in accordance with the following safety instructions. Specialists must be familiar with the basics of electrical engineering and must be able to recognize and avoid hazards. The corresponding symbol on the packaging indicates that the intervention of qualified electrical personnel is required.
WARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property.
• The products are suitable for the areas of system assembly, control and assembly of electrical appliances.
• Packaged products must not be handled or opened incorrectly.
• Only use plugs specified in the standards specified in the technical data (e.g. those listed in the product accessories on the phoenixcontact.com/products website).
• If you use the product directly in conjunction with third-party products, you are entirely responsible for this.
• For operating voltages > 50 VAC, conductive connector housings must be grounded
• Make sure that the protective or operating ground is properly engaged.
• Observe the respective technical data. The information is given in the following points:
o About the product
o On the package label
o In the documentation provided
o Im Web phoenixcontact.com/products to the product entry
• Observe the installation instructions/Design In documents for the product in the download area on the web at phoenixcontact.com/products.
• Do not close unconnected connectors with a safety cap. Suitable accessories for the product can be found in the accessories area of the mesh article under phoenixcontact.com/products
• The connector will become warm during normal operation. Depending on environmental conditions, the surface of the connector may be continuously heated. In this case, the user is responsible for the application of the safety instructions (e.g. DIN EN ISO 13732-1:2008-12).
• Use the connector only in the fully engaged and locked state.
• Make sure that the tensile load does not exceed the limits set by the standard when laying the cable.
• Take into account the minimum bending radius of the cable. Lay the cable without twisting it.
Article features
Product TypeBulkhead
Product FamilySunclix
No. of poles1
dimensions
width5.2 mm
height6.2 mm
length27.6 mm
Electrical characteristics
Current rating (2.5 mm²)27 A
Current rating (4.0 mm²)34 A
Passage resistance< 0.3 mΩ (Crimp to Crimper)
Mechanical characteristics
Mechanical data
Manoeuvring cycles100
Insertion force< 45 N ±10 N
Material information
Contact MaterialCu
Contact Surface MaterialAg
Cable/Line
Single conductor, cross-section2.5 mm² 4 mm²
Length of the stripping section of the individual strands9 mm -1 mm
Montage
LinkCrimp
Environmental and electrical life conditions
Environmental conditions
Ambient temperature (operating)-40 °C ... 85 °C
Ambient temperature (mounting)-5 °C ... 50 °C

ETIM for 1196770 Connectors (EC000796)
Feature Name Feature Value
Contact type (EF001587) Pin
Ambient temperature (EF002386) 85 °C
Connectable conductor cross section solid-core (EF007337) 2.5 mm²
Type of electric connection (EF003961) Crimp connection
Type of contact (EF012213) Rolled
Material contact (EF007544) Copper
Material of contact surface (EF004020) Other
Min. number of insertion cycles (EF012212) 100

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.