> PHOENIX CONTACT > Field Device Connectors (FDC) > 1196772
PHOENIX CONTACT PV-FT-C3M-C-2,5-4-VPE250 PV-FT-C3M-C-2,5-4-VPE250 1196772 PHOENIX CONTACT Crimp contact, Article family: SUNCLIX, number of poles: 1,.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PV-FT-C3M-C-2,5-4-VPE250 1196772 PHOENIX CONTACT Crimp contact, Article family: SUNCLIX, number of poles: 1,..

PV-FT-C3M-C-2,5-4-VPE250

1196772

PHOENIX CONTACT

250 Pcs.

Crimp contact, Article family: SUNCLIX, number of poles: 1, min. conductor cross-section: 2.5 mm², max. conductor cross-section: 4 mm², rated current: 27 A, Connection type: Crimping, Contact connection type: Male Crimp Contact, Item Family: Sunclix, Pole Number: 1, Min. Conductor Cross-Section: 2.5 mm², Max. Conductor Cross-Section: 4 mm², Rated Current: 27 A, Connection Type: Crimp, Contact Connection Type: Male

Connectors > Contact for industrial connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety Indication
Safety Notes• WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them.
• WARNING: only qualified personnel specialized in electrical engineering can install and use the product, always taking into account the following safety indications. Specialized personnel must be familiar with the fundamentals of electrical engineering. You must be able to identify and avoid hazards. The corresponding symbol on the packaging indicates that personnel specialized in electrical engineering are required for installation and operation.
WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury.
• The products are suitable for the areas of application of the construction of electrical equipment, control systems and systems.
• Ready-made products may not be tampered with or opened in an unauthorized manner.
• Use only mating connectors that comply with the technical data of the specified standards (e.g. those indicated on the product accessories on the website on phoenixcontact.com/products).
• The user is responsible for using the product directly in conjunction with products from other manufacturers.
• With operating voltages > 50 V AC, electrically conductive connector housings must be grounded
• Check that the functional or protective ground is properly connected.
• Please note the relevant technical data. You will find the data:
or in the product
or on the packaging label
or in the documentation provided
or on the website phoenixcontact.com/products by selecting the product
• Please note the Design In assembly/documentation instructions in the download area of the product website on phoenixcontact.com/products.
• Do not close plugged-in connectors with a cap. You will find the right accessory in the accessories section of the article, under phoenixcontact.com/products
• The connector heats up during normal operation. Depending on the ambient conditions, the surface of the connector may also heat up. In this case, the user will be responsible for affixing the warning indications (e.g. DIN EN ISO 13732-1:2008-12).
• Use connectors only fully plugged in and locked.
• When laying the cable, check that the tensile load applied to the connectors does not exceed the limits set out in the standards.
• Respect the minimum bending radius of the cable. Lay the cord without forcing it.
Item Properties
Product TypeBushings
Product FamilySunclix
Number of poles1
Dimensions
Width5.2 mm
Height6.2 mm
Longitude27.6 mm
Electrical Properties
Rated current (2.5 mm²)27 A
Rated current (4.0 mm²)34 A
Low contact resistance< 0.3 mΩ (Crimp to Crimp)
Mechanical Properties
Mechanical data
Plug Cycles100
Insertion Force< 45 N ±10 N
Material Data
Contact materialCu
Material: Contact SurfaceAg
Cable/Line
Single Driver, Section2.5 mm² 4 mm²
Stripping Length of Individual Conductors9 mm -1 mm
assembly
Connection typeSetting
Environmental and life-life conditions
Environmental conditions
Ambient Temperature (Service)-40 °C ... 85 °C
Ambient Temperature (Mounting)-5 °C ... 50 °C

ETIM for 1196772 Connectors (EC000796)
Feature Name Feature Value
Contact type (EF001587) Pin
Ambient temperature (EF002386) 85 °C
Material contact (EF007544) Copper
Min. number of insertion cycles (EF012212) 100

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.