> PHOENIX CONTACT > Safety > 1480212
PHOENIX CONTACT PSR-PLC21-2CO-24DC-PT PSR-PLC21-2CO-24DC-PT 1480212 PHOENIX CONTACT Safe coupling relay with forced guide contacts, with galvanic .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PSR-PLC21-2CO-24DC-PT 1480212 PHOENIX CONTACT Safe coupling relay with forced guide contacts, with galvanic ..

PSR-PLC21-2CO-24DC-PT

1480212

PHOENIX CONTACT

10 Pcs.

Safe coupling relay with forced guide contacts, with galvanic separation, 2 switches, 1 channel, push-in connection, width: 14 mm Coupling Relays Safe coupling relay with force-guided contacts, electrically isolated, 2 changeover contacts, 1-channel, push-in connection, width: 14 mm

Automation > Switching relay
Safety

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Product properties
Product typeCoupling relay
Product familyPLC-INTERFACE
ApplicationForcibly guided contacts
Mechanical service lifeapprox. 107cycles
Relay typeElectromechanical relay in accordance with IEC/EN 61810
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage categoryIII
Pollution degree2
Times
Typ. starting time with Us< 70 ms (when controlled via A1)
Typical release time< 50 ms (on demand via A1)
Recovery time500 ms (following demand of the safety function)
Electrical properties
Maximum power dissipation for nominal condition4.825 W (UB= 30 V, US= 24 V, IS= 30 mA, IL² = 37 A, Rcontact= 0.1 Ω)
Nominal operating mode100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage250 V AC
Rated surge voltage/insulationBasic insulation 4 kV between all current paths and housing
Safe isolation, reinforced insulation 6 kV between 250 V load current paths and 24 V logic paths
Supply
DesignationA1/A2
Rated control circuit supply voltage US21.6 V DC ... 28.8 V DC
Rated control circuit supply voltage US24 V DC -10 % / +20 %
Rated control supply current IS30 mA
Inrush currenttyp. 100 mA (Δt = 10 ms at Us)
Filter time1 ms (Test pulse width, high test pulse and low test pulse)
1 s (Test pulse rate, high test pulse and low test pulse)
Power consumption at UD650 mW (to US)
Protective circuitSerial protection against polarity reversal; Suppressor diode, 38.6 V/600 W
Status display1 x green LED (PWR)
Output data
Relay: Relay outputs (11/12/14, 21/22/24)
Output descriptionsafety-related
Number of outputs2
Contact switching type2 changeover contacts
Contact materialAgNi
Switching capacitymin. 150 mW (N/O contact / N/C contact)
Inrush currentmax. 6 A (N/O contact)
max. 4 A (N/C contact)
Switching capacity in accordance with IEC 60947-5-16 A (AC1, 230 V)
3 A (AC15, 230 V)
6 A (DC1, 24 V, N/O contact)
4 A (DC1, 24 V, N/C contact)
3 A (DC13, 24 V, N/O contact)
Limiting continuous current6 A (N/O contact, high demand)
4 A (N/O contact, low demand)
4 A (N/C contact, high-demand)
2.4 A (N/C contact, low-demand)
Sq. Total current37 A2(N/O contact, high-demand, observe derating)
16 A2(N/C contact, high-demand, observe derating)
Switching frequencymax. 1 Hz
Mechanical service life107cycles
Output fuse6 A gL/gG
4 A gL/gG (for low-demand applications)
Connection data
Conductor connection
Connection methodPush-in connection
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve0.2 mm² ... 2.5 mm²
Conductor cross-section AWG26 ... 14
Stripping length8 mm
Signaling
Operating voltage display1 x green LED (PWR)
Dimensions
Width14 mm
Height80 mm
Depth104 mm
Material specifications
Housing materialPolyamide
Characteristics
Safety data: EN ISO 13849
Category1
Performance level (PL)c
Safety data: IEC 61508 – High-demand for 1-channel wiring (1oo1 structure)
Safety Integrity Level (SIL)2
Safety data: IEC 61508 – Low-demand for 1-channel wiring (1oo1 structure)
Safety Integrity Level (SIL)2
Safety data: EN IEC 62061
Safety Integrity Level (SIL)2
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Ambient temperature (operation)-20 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)-20 °C ... 85 °C
Maximum altitude≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average; 95% occasionally, non-condensing)
Max. permissible relative humidity (operation)75 % (on average; 95% occasionally, non-condensing)
Shock10g for Δt = 11 ms (continuous shock: 5g for Δt = 16 ms)
Vibration (operation)10 Hz ... 150 Hz, amplitude 0.75 mm, 1g
Approvals
CE
IdentificationCE-compliant
Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsIEC 60947-1
Mounting
Mounting typeDIN rail mounting
Assembly instructionsSee derating curve
Mounting positionvertical or horizontal
Connection methodPush-in connection

ETIM for 1480212 Relays (EC001437)
Feature Name Feature Value
Type of electric connection (EF003961) Other
Complete with socket (EF003359) Yes
With detachable clamps (EF003340) No
With LED indication (EF005950) Yes
Rated control supply voltage DC (EF003980) 21.6 V
Voltage type for actuating (EF008242) DC
Number of contacts as normally closed contact (EF008255) 0
Number of contacts as normally open contact (EF008256) 0
Number of contacts as change-over contact (EF008257) 0
With forced-guided contacts (EF003357) No
Nominal current (EF000001) 0.03 A
Degree of protection (IP) (EF005474) IP20
Width (EF000008) 14 mm
Height (EF000040) 80 mm
Depth (EF000049) 104 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.