> PHOENIX CONTACT > Safety > 2702357
PHOENIX CONTACT PSR-MM30-2NO-2DO-24DC-SC PSR-MM30-2NO-2DO-24DC-SC 2702357 PHOENIX CONTACT Two-channel zero-speed and over-speed safety relays up to S.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PSR-MM30-2NO-2DO-24DC-SC 2702357 PHOENIX CONTACT Two-channel zero-speed and over-speed safety relays up to S..

PSR-MM30-2NO-2DO-24DC-SC

2702357

PHOENIX CONTACT

1 Pcs.

Two-channel zero-speed and over-speed safety relays up to SIL 3, Cat. 4, PL e, 2 safe relay outputs, suitable for connecting HTL, TTL or sine/cosine encoders as well as proximity switches, plug-in screw terminal block, width: 22.5 mm 2-channel speed and stop controller up to SIL 3, category 4, PL e, 2 safe relay outputs, suitable for connection of HTL, TTL or Sen/Cos encoders as well as proximity detectors, plug-in screw terminal, width: 22.5 mm

Automation > Speed-/standstill monitoring relay
Safety

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey2702357
Packing unit1 pc
Catalog pagePage 243 (C-6-2019)
GTIN4055626133225
Weight per Piece (excluding packing)200.000 g
Custom tariff number90328900
Country of originDE (Germany)

Drawings

Block diagram
Circuit diagram

Circuit diagram

Back to top

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Width22.5 mm
Height112.2 mm
Depth114.5 mm
Back to top

Ambient conditions

Ambient temperature (operation)-40 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Maximum altitude≤ 2000 m (Above sea level)
Back to top

Power supply

DesignationA1/A2
Rated control circuit supply voltage US24 V DC -15 % / +10 % (provide external protection)
Rated control supply current IStyp. 74 mA
Power consumption at UStyp. 1.78 W
Inrush current< 18 A (Δt = 500 µs at Us)
Filter time2 ms (at A1 in the event of voltage dips at Us)
Protective circuitSerial protection against polarity reversal 33 V suppressor diode
Back to top

Digital inputs

Input nameOperating mode and monitoring inputs
Description of the inputNPN, IEC 61131-2, type 1
Number of inputs1 (Non-safety-related start input: S34)
3 (Safety-related operating mode inputs: I1, I2, I3)
2 (Safety-related monitoring inputs: MI1, MI2)
Input voltage range "0" signal0 V DC ... 5 V DC
Input voltage range "1" signal15 V DC ... 30 V DC
Input current range "0" signal0 mA ... 1.5 mA
Inrush current< 5 mA
Current consumptiontyp. 4 mA (at US)
Filter timemax. 2 ms (Test pulse width; low test pulses for operating mode and monitoring inputs)
Test pulse rate = 5 x Test pulse width
Max. permissible overall conductor resistance150 Ω
Discrepancy time2 s (I1, I2, I3)
2.5 s (MI1, MI2)
Protective circuit/component33 V suppressor diode
Back to top

Measuring inputs

Input nameProximity switch inputs
Description of the inputNPN, IEC 61131-2, type 1
Number of inputs2 (Safety-related proximity switch inputs: IN1 IN2)
Precision± 2 % (in reference to the parameterized limit value)
Inrush current< 12 mA
Current consumptiontyp. 10 mA (at US)
Input voltage range "0" signal0 V DC ... 5 V DC
Input voltage range "1" signal15 V DC ... 30 V DC
Input current range "0" signal0 mA ... 1.5 mA
Max. permissible overall conductor resistance150 Ω
Limit frequencymax. 2 kHz (Minimum pulse duration: 2 µs)
Protective circuit33 V suppressor diode
Input nameEncoder input
Description of the inputTTL, HTL, Sin/Cos
Number of inputs1 (Safety-related encoder input, RJ45)
Precision± 2 % (in reference to the parameterized limit value)
Current consumption< 3 mA (Per track for US)
Max. permissible overall conductor resistance150 Ω
Limit frequencymax. 400 kHz
max. 250 kHz For active diagnostic safety encoder
HTL signal form0 V DC ... 3 V DC (Low)
12 V DC ... 30 V DC (High)
TTL signal form0 V DC ... 0.9 V DC (Low)
2.5 V DC ... 5 V DC (High)
Sine/cosine signal form2 V DC ... 3 V DC (1 Vppdifferential signal)
Back to top

Relay outputs: enabling current path

Output nameEnabling current path
Output description2 NO contacts each in series, without delay, floating
Number of outputs2 (safety-related N/O contacts: 13/14, 23/24)
Contact type2 enabling current paths
Contact materialAgSnO2
Switching voltagemin. 12 V AC/DC
max. 250 V AC/DC (Observe the load curve)
Limiting continuous current6 A
Inrush currentmin. 3 mA
max. 6 A
Sq. Total current72 A2(observe derating)
Switching capacitymin. 60 mW
Switching frequencymax. 0.5 Hz
Mechanical service life10x 106cycles
Switching capacity according to IEC 60947-5-14 A (24 V (DC13))
5 A (250 V (AC15))
Output fuse6 A gL/gG
Back to top

Alarm outputs

Output descriptionPNP
Number of outputs2 (Non-safety-related signal outputs: MO1, MO2)
Voltageapprox. 22 V DC (Us- 2 V)
Currentmax. 100 mA
Maximum inrush current500 mA (Δt = 1 ms at Us)
Protective circuit/component33 V suppressor diode
Short-circuit protectionno
Back to top

Times

Typical response time at US< 200 ms (For Usautostart)
< 150 ms (For Usmanual, monitored start)
Delay time range0 s ... 10 s ±10 % (Adjustable switch-on delay for downtime contacts 23/24)
Restart time< 1 s (Boot time)
Recovery time< 1 s
Back to top

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with IEC/EN 61810-3 (EN 50205)
Nominal operating mode100% operating factor
Net weight196.3 g
Mounting positionvertical or horizontal
Mounting typeDIN rail mounting
Assembly instructionsSee derating curve
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Housing materialPBT
Housing coloryellow
Operating voltage display1 x green LED (PWR)
Status display2x LED green (OUT1, OUT2)
Back to top

Connection data

Connection methodScrew connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3
Torque0.5 Nm ... 0.6 Nm
Back to top

Safety-related characteristic data

Stop category0
DesignationIEC 61508 - High demand
Safety Integrity Level (SIL)3
DesignationEN ISO 13849
Performance level (PL)e (6 A DC1, 17520 switching cycles/year)
Category4
DesignationEN 62061
Safety Integrity Level Claim Limit (SIL CL)3
Back to top

Standards and Regulations

DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178, EN 60947-5-1
Rated insulation voltage250 V AC
Rated surge voltage/insulationBasic insulation 4 kV between all current paths and housing
Safe isolation, reinforced insulation 6 kV between input circuit (A1/A2, I1, I2, I3, MI1, MI2, IN1, IN2, S34, MO1, MO2, RJ45, USB) and the enabling current paths (13/14, 23/24)
Degree of pollution2
Overvoltage categoryIII
Shock15g
Vibration (operation)10 Hz ... 150 Hz, 2g
Back to top

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.027371102
eCl@ss 4.127371102
eCl@ss 5.027371901
eCl@ss 5.127371901
eCl@ss 6.027371800
eCl@ss 7.027371811
eCl@ss 8.027371811
eCl@ss 9.027371811
Back to top

ETIM

ETIM 3.0EC001449
ETIM 4.0EC001449
ETIM 5.0EC001448
ETIM 6.0EC001448
ETIM 7.0EC001448
Back to top

UNSPSC

UNSPSC 6.0130211901
UNSPSC 7.090139121501
UNSPSC 1139121501
UNSPSC 12.0139121501
UNSPSC 13.239122331
UNSPSC 18.039122331
UNSPSC 19.039122331
UNSPSC 20.039122331
UNSPSC 21.039122331
Back to top

ETIM for 2702357 Relays (EC001448)
Feature Name Feature Value
Type of electric connection (EF003961) Screw connection
Rated control supply voltage DC (EF003980) 24 V
Voltage type for actuating (EF008242) DC
With detachable clamps (EF003340) Yes
Function rotational speed monitoring (EF003430) No
Function standstill monitoring (EF003431) Yes
Rated operating frequency (EF007370) 2000 Hz
With feedback circuit (EF003343) No
Number of outputs, safety related, undelayed, with contact (EF003344) 0
Number of outputs, safety related, delayed, with contact (EF003345) 0
Number of outputs, safety related, undelayed, semiconductors (EF003346) 0
Number of outputs, safety related, delayed, semiconductors (EF003347) 0
Number of outputs, signalling function, undelayed, with contact (EF003348) 0
Number of outputs, signalling function, delayed, with contact (EF003349) 0
Number of outputs, signalling function, undelayed, semiconductors (EF003350) 0
Number of outputs, signalling function, delayed, semiconductors (EF003351) 0
Suitable for safety functions (EF001597) Yes
With approval for BG BIA (EF004145) No
With approval according to UL (EF001783) Yes
Width (EF000008) 22.5 mm
Height (EF000040) 112.2 mm
Depth (EF000049) 114.5 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.