> PHOENIX CONTACT > Industrial Relays > 2910533
PHOENIX CONTACT PLC-RPT-120UC/21HC/MS PLC-RPT-120UC/21HC/MS 2910533 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT-120UC/21HC/MS 2910533 PHOENIX CONTACT Relay Module

PLC-RPT-120UC/21HC/MS

2910533

PHOENIX CONTACT

10 Pcs.

Relay Module PLC-INTERFACE, consisting of socket relay and relay with plug-in power contact with manual activation, integrated status LED, push-in connection, 1 switch, Rectifier bridge, Input voltage: 120 VAC / 110 VDC PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 120 V AC / 110 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Product properties
Product typeRelay Module
Product familyPLC-INTERFACE
ApplicationPalm switch
High continuous currents
Operating mode100% operating factor
Mechanical service life5x 106cycles
Data management status
Date of last data management05.07.2024
Article revision03
Insulation characteristics
InsulationSafe isolation, reinforced insulation
Overvoltage categoryIII
Pollution degree2
Electrical properties
Maximum power dissipation for nominal condition0.6 W
Test voltage (Winding/contact)4 kVrms(50 Hz, 1 min., winding/contact)
Rated insulation voltage250 V AC
Rated surge voltage6 kV
Input data
Coil side
Nominal input voltage UN120 V AC
110 V DC
Input voltage range96 V AC ... 168 V AC (20 °C)
93.5 V DC ... 154 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)110 V DC
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN5 mA
Typical response time6 ms (110 V DC)
3 ms ... 15 ms (120 V AC)
Typical release time8 ms (110 V DC)
Typical release time range3 ms ... 15 ms (120 V AC)
Protective circuitBridge rectifier; Bridge rectifier
Operating voltage displayYellow LED
Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage12 V (10 mA)
Limiting continuous current10 A
Maximum inrush current24 A (20 ms)
Min. switching current10 mA (12 V)
Interrupting rating (ohmic load) max.264 W (24 V DC)
62 W (48 V DC)
48 W (60 V DC)
52 W (110 V DC)
66 W (220 V DC)
2750 VA (250 V AC)
Switching capacity2 A (24 V, DC13)
3 A (230 V, AC15)
Connection data
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14
Dimensions
Width14 mm
Height80 mm
Depth104 mm
Material specifications
Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Environmental and real-life conditions
Ambient conditions
Degree of protection (Relay)RT II (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Installation location)≥ IP54 (Installation location)
Ambient temperature (operation)-40 °C ... 55 °C
Ambient temperature (storage/transport)-20 °C ... 85 °C
Altitude≤ 2000 m
Approvals
CE
CertificateCE-compliant
UKCA
CertificateUKCA-compliant
UL, USA
IdentificationUL 508
UL 508 Recognized
UL, USA/Canada
IdentificationUL 508
UL 508 Recognized
Shipbuilding approval
CertificateTAE0000196
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
EN 60068-2-60
DNV GL data
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board
EMC data
Electromagnetic compatibilityConformance with EMC directive
Low Voltage DirectiveConformance with Low Voltage Directive
Standards and regulations
Standards/regulationsIEC 60947-5-1
Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

ETIM for 2910533 Relays (EC001437)
Feature Name Feature Value
Type of electric connection (EF003961) Other
Complete with socket (EF003359) Yes
With detachable clamps (EF003340) No
With LED indication (EF005950) Yes
Rated control supply voltage AC 50 Hz (EF003978) 96 V
Rated control supply voltage AC 60 Hz (EF003979) 96 V
Rated control supply voltage DC (EF003980) 93.5 V
Voltage type for actuating (EF008242) AC
Drive, polarization (EF003355) Polarized
Drive, switching attitude (EF003356) Mono stable
Number of contacts as normally closed contact (EF008255) 0
Number of contacts as normally open contact (EF008256) 0
Number of contacts as change-over contact (EF008257) 1
Type of switch contact (EF003358) Single contact
With forced-guided contacts (EF003357) No
Material of contact insert (EF008521) Other
Material of contact surface (EF004020) Untreated
Nominal current (EF000001) 0.005 A
Degree of protection (IP) (EF005474) IP20
Width (EF000008) 14 mm
Height (EF000040) 80 mm
Depth (EF000049) 104 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.