> PHOENIX CONTACT > INTERFACE Components (IF) > 1050233
PHOENIX CONTACT MACX MCR-EX-TC-I MACX MCR-EX-TC-I 1050233 PHOENIX CONTACT Ex i temperature transducer: converts signals from thermocouples in.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

MACX MCR-EX-TC-I 1050233 PHOENIX CONTACT Ex i temperature transducer: converts signals from thermocouples in..

MACX MCR-EX-TC-I

1050233

PHOENIX CONTACT

1 Pcs.

Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL. Intrinsically Safe Temperature Converter: Transforms signals from thermocouples and mV sources installed in the Ex zone and transmits a 0/4-20 mA signal to a load in the safe zone. Free programming. 3-way separation, screw connection, SIL.

Automation > Temperature transformer
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey1050233
Packing unit1 pc
Catalog pagePage 148 (C-5-2019)
GTIN4055626663463
Weight per Piece (excluding packing)0.000 g
Custom tariff number85437090
Country of originDE (Germany)

Drawings

Block diagram

Block diagram

Back to top

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Width12.5 mm
Height112.5 mm
Depth114.5 mm
Back to top

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Maximum altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Degree of protectionIP20
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Back to top

Input data

InputIntrinsically safe
Sensor types that can be used (TC)B, E, J, K, N, R, S, T, L, U, C, D, A-1, A-2, A-3, M, Lr
Temperature measuring range-250 °C ... 2500 °C (Range depending on the sensor type)
Input signal range-1000 mV ... 1000 mV
Measuring range spanMin. 50 K with thermocouple, 10% of the nominal span of the respective range with mV sources
Back to top

Output data

Signal outputCurrent output
Configurable/programmableYes
Current output signal0 mA ... 20 mA
4 mA ... 20 mA (SIL)
Load/output load current output≤ 600 Ω
Output ripple (current)< 15 µAPP
Behavior in the event of a sensor errorAs per NE 43 or can be freely defined
Back to top

Power supply

Nominal supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
Max. current consumption< 40 mA (24 V DC)
Power dissipation≤ 0.76 W
Power consumption≤ 1 W
Back to top

Connection data

Connection methodScrew connection
Stripping length7 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14
Torque0.5 Nm ... 0.6 Nm
Back to top

General

No. of channels1
Transmission error, typical0.1 % (E.g., for type J, 600 K span, 4 mA ... 20 mA)
Temperature coefficient, typical0.01 %/K
Typical cold point errors± 2 K
Step response (0–99%)typ. 700 ms
≤ 1000 ms
Alignment zero± 5 %
Alignment span± 5 %
Status displayGreen LED (supply voltage, PWR)
Red LED, flashing 2.4 Hz (cable error, sensor error on input or output, ERR)
Red LED, flashing 1.2 Hz (service operation, ERR)
Red LED, permanently on (module error, ERR)
Electromagnetic compatibilityConformance with EMC directive
Interference emissionEN 61000-6-4
Housing materialPA 6.6-FR
Colorgray
DesignationInput/output/power supply
Electrical isolation300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
DesignationInput/output
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
DesignationInput/power supply
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
ConformanceCE-compliant, additionally EN 61326
ATEX I (M1) [Ex ia Ma] I
 II (1) G [Ex ia Ga] IIC
 II (1) D [Ex ia Da] IIIC
 II 3(1) G Ex ec ic [ia Ga] IIC T4 Gc
IECEx[Ex ia Ma] I
[Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ec ic [ia Ga] IIC T4 Gc
Ex ec ic IIC T4 Gc
SIL2
Back to top

Safety data

Max. internal capacitance Ci44 nF
Max. output voltage Uo6 V
Max. output current Io4.3 mA (mV)
Max. output power Po25.2 mW (Linear)
GroupIIC/IIB/IIA
Max. external inductivity Lo100 mH
Max. external capacitance Co40 µF
Safety-related maximum voltage Um253 V AC (125 V DC, Zone 2: 3.1, 3.2 = 30 V DC)
Input voltage Ui7 V
Input current Ii100 mA
Input power Pi550 mW
Max. internal capacitance Ci47 µF
Max. output voltage Uo3.5 V
Max. output current Io400 mA
Max. output power Po350 mW
GroupIIC
Max. external inductivity Lo20 µH
Max. external capacitance Co2 µF
Back to top

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value1 %
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value1 %
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value1 %
Back to top

Standards and Regulations

Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4
DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
EN 61000-4-4
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
ConformanceCE-compliant, additionally EN 61326
ATEX I (M1) [Ex ia Ma] I
 II (1) G [Ex ia Ga] IIC
 II (1) D [Ex ia Da] IIIC
 II 3(1) G Ex ec ic [ia Ga] IIC T4 Gc
IECEx[Ex ia Ma] I
[Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ec ic [ia Ga] IIC T4 Gc
Ex ec ic IIC T4 Gc
DNV GL-TemperatureB
DNV GL-HumidityB
DNV GL-VibrationA
DNV GL-EMCB
DNV GL-EnclosureRequired protection according to the Rules shall be provided upon installation on board
GroupIIC/IIB/IIA
IIC
Back to top

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 8.027200206
eCl@ss 9.027210129
Back to top

ETIM

ETIM 5.0EC001446
ETIM 6.0EC002919
ETIM 7.0EC002919
Back to top

ETIM for 1050233 Sensors (EC002919)
Feature Name Feature Value
Measuring range (EF001836) -250 °C
Analogue output 0 mA ... 20 mA (EF006808) No
Analogue output 4 mA ... 20 mA (EF006810) Yes
Analogue output 0 V ... 2 V (EF009886) No
Analogue output 0 V ... 5 V (EF009887) No
Analogue output 0 V ... 10 V (EF006807) No
Analogue output 2 V ... 10 V (EF009888) No
With switching output (EF005225) No
EMC-version (EF001062) Yes
Ambient temperature (EF002386) 70 °C
Weight (EF000167) 0.15 kg

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.