> PHOENIX CONTACT > INTERFACE Components (IF) > 1290776
PHOENIX CONTACT MACX MCR-EX-AP-RPSS-I-IR-SP MACX MCR-EX-AP-RPSS-I-IR-SP 1290776 PHOENIX CONTACT Ex i-Input and power signal conditioner with 2 limit val.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

MACX MCR-EX-AP-RPSS-I-IR-SP 1290776 PHOENIX CONTACT Ex i-Input and power signal conditioner with 2 limit val..

MACX MCR-EX-AP-RPSS-I-IR-SP

1290776

PHOENIX CONTACT

1 Pcs.

Ex i-Input and power signal conditioner with 2 limit value relays, powers 2, 3 and 4 conductor measurement transducers, transmits 1:1 active or passive input signals of 0 mA/4 mA... 20 mA and has 2 configurable limit value outputs. With HART transparency, Standard configuration, 4-way separation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection Ex i, Input and Power Signal Conditioner with 2 Limit Value Relays, Feeds 2 or 3 Conductor Measurement Transducers, Transmits 1:1 0 mA / 4 mA Input Signals... 20 mA active or passive and has 2 configurable limit value outputs. 4-way separation, Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2-, 3-, and 4-conductor measuring transducer, transmits 1:1 passive or active 0 mA/4 mA ... 20 mA input signals and has 2 configurable limit value outputs. HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection

Automation > Isolation amplifier
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
GeneralInstallation conditions influence the ambient temperature.
Please refer to the “Control cabinet installation instructions”.
GeneralOutput behavior = input signal
Product properties
Product typeRepeater power supplies
Product familyMACX Analog
No. of channels1
Electrical properties
No. of channels1
Electrical isolation4-way isolation
Linearity error≤ 0.1 %
Typical offset error≤ 0.1 %
Signal transmission behaviorIn = Out
Temperature coefficient, typical≤ 0.1 % (10 K)
Reverse polarity protectionyes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulationsIEC/EN 60079-11
Rated insulation voltage375 VPP
Electrical isolation Input/power supply IEC/EN 60079-11
Standards/regulationsIEC/EN 60079-11
Rated insulation voltage375 VPP
Electrical isolation Input/error message output IEC/EN 60079-11
Standards/regulationsIEC/EN 60079-11
Rated insulation voltage375 VPP
Electrical isolation Input/limit value contact IEC/EN 60079-11
Standards/regulationsIEC/EN 60079-11
Rated insulation voltage375 VPP
Electrical isolation Output/supply
Test voltage350 V (50 Hz, 60 s)
Electrical isolation Output/limit value contact
Test voltage350 V (50 Hz, 60 s)
Electrical isolation Output/supply/error message output
Test voltage350 V (50 Hz, 60 s)
Supply
Nominal supply voltage24 V DC
Supply voltage range18 V ... 31.2 V
Power dissipation1.5 W (RL250 Ω)
Power consumption2 W (20 mA)
Input data
Signal: Repeater power supply operation
Description of the inputactive and passive current input, intrinsically safe
Input signalCurrent
Current input signal4 mA ... 20 mA (with HART)
2 mA ... 22 mA (Function area)
Short-circuit current≤ 35 mA
Line fault detection< 3.6 mA (Line break)
> 21 mA (Short circuit)
Non-load voltage≤ 26 V
Signal: Signal conditioner operation
Description of the inputPassive current input, intrinsically safe
Current input signal4 mA ... 20 mA (with HART)
2 mA ... 22 mA (Function area)
Input resistance current input> 250 Ω (for mA sources)
Input current≤ 50 mA (for mA sources)
Short-circuit current≤ 35 mA
Line fault detection< 3.6 mA (Line break)
> 21 mA (Short circuit)
Non-load voltage≤ 26 V
Output data
Signal: Error message output
Maximum switching voltage30 V
Max. switching current100 mA
Switching: Relay
Contact switching type2 N/O contacts
Max. switching current≤ 170 mA (Resistive load)
≤ 500 mA (≤ 1 ms)
Typical response time< 80 ms
Typical turn-off time< 100 ms
Signal: Repeater power supply operation
Output descriptionCurrent output (active)
Current output signal4 mA ... 20 mA (with HART)
2 mA ... 22 mA (Function area)
Load0 Ω ... 600 Ω
Output ripple (current)≤ 40 µA (effective)
Signal: Signal conditioner operation
Output descriptionSignal conditioner operation
Current output signal4 mA ... 20 mA (with HART)
2 mA ... 22 mA (Function area)
Load0 Ω ... 600 Ω
Output ripple (current)≤ 40 µA (effective)
Connection data
Cross section AWG(converted acc. to IEC)
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Ex data
Ex installation (EPL)Gc
Ex i circuits (EPL)Ga
Da
Ma
Safety data: Repeater power supply operation (2-conductor measuring transducer)
NoteWith connection of measuring transducers
Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo27 V
Max. output current Io87.9 mA
Max. output power Po574 mW
Safety-related maximum voltage Um253 V AC
IIB/IIIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co14 mH / 705 nF
IIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co2.3 mH / 90 nF
IIB/IIIC (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co10 mH / 290 nF, 1 mH / 380 nF, 0.2 mH / 600 nF
IIC (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co1 mH / 56 nF, 0.5 mH / 72 nF, 0.2 mH / 90 nF
Safety data: Repeater power supply operation (3-conductor measuring transducer)
NoteWith connection of measuring transducers
Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo27 V
Max. output current Io88.3 mA
Max. output power Po574 mW
Safety-related maximum voltage Um253 V AC
IIB/IIIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co14 mH / 705 nF
IIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co2.3 mH / 90 nF
IIB/IIIC (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co10 mH / 290 nF, 1 mH / 380 nF, 0.2 mH / 600 nF
IIC (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co1 mH / 56 nF, 0.5 mH / 72 nF, 0.2 mH / 90 nF
Safety data: Signal conditioner operation
NoteWith connection of power sources
Input voltage Ui30 V
Input current Ii100 mA
Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo4.1 V
Max. output current Io0 mA
Max. output power Po0 mW
Interfaces
Data communication (bypass)
Protocols supportedHART-transparent
Frequency measuring range0.5 kHz ... 10 kHz (bidirectional HART transmission)
Signaling
Status displayGreen LED (supply voltage)
LED yellow (switching state)
Red LED (line errors)
Dimensions
Dimensional drawingkrbhdfxwui.jpg
Width17.5 mm
Height107.8 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)
Material specifications
Flammability rating according to UL 94V0
Housing materialPolyamide (PA 6.6)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20 (Terminal blocks)
IP30 (Housing)
Ambient temperature (operation)-40 °C ... 70 °C (Stand-alone device: any mounting position)
-40 °C ... 48 °C (Group assembly: vertical DIN rail without circulating air)
-40 °C ... 58 °C (Group assembly: vertical DIN rail with circulating air)
-40 °C ... 56 °C (Group assembly: horizontal DIN rail without circulating air)
-40 °C ... 60 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m
Permissible humidity (operation)≤ 95 % (non-condensing)
Approvals
ATEX
Identification II (1) G [Ex ia Ga] IIC
 II (1) D [Ex ia Da] IIIC
 II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
 I (M1) [Ex ia Ma] I
IECEx
Identification[Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex nA nC [ia Ga] IIC T4 Gc
[Ex ia Ma] I
Safety Integrity Level (SIL, IEC 61508)
Identification2
EMC data
Electromagnetic compatibilityTested in accordance with the following standards and regulations: EN 61326-1 For industrial use, NAMUR NE 21
Standards and regulations
Electrical isolation4-way isolation
Mounting
Mounting typeNS 35/15, NS 35/7,5
Mounting positionvertical, horizontal

ETIM for 1290776 Sensors (EC002653)
Feature Name Feature Value
Number of input ranges -60 mV ... +60 mV (EF006927) 0
Number of input ranges -100 mV ... +100 mV (EF006912) 0
Number of input ranges -300 mV ... +300 mV (EF006920) 0
Number of input ranges -500 mV ... +500 mV (EF006926) 0
Number of input ranges -1 V ... +1 V (EF006906) 0
Number of input ranges -2 V ... +2 V (EF006913) 0
Number of input ranges -2.5 V ... +2.5 V (EF006915) 0
Number of input ranges -5 V ... +5 V (EF006923) 0
Number of input ranges -10 V ... +10 V (EF006909) 0
Number of input ranges -20 V ... +20 V (EF006917) 0
Number of input ranges 0 mV ... 60 mV (EF006905) 0
Number of input ranges 0 mV ... 100 mV (EF006893) 0
Number of input ranges 0 mV ... 200 mV (EF006898) 0
Number of input ranges 0 mV ... 300 mV (EF006901) 0
Number of input ranges 0 mV ... 500 mV (EF006904) 0
Number of input ranges 0 V ... 1 V (EF006890) 0
Number of input ranges 0 V ... 2 V (EF006894) 0
Number of input ranges 0 V ... 2.5 V (EF006895) 0
Number of input ranges 0 V ... 5 V (EF006903) 0
Number of input ranges 0 V ... 10 V (EF006892) 0
Number of input ranges 0 V ... 20 V (EF006897) 0
Number of input ranges 0 V ... 24 V (EF006899) 0
Number of input ranges 0 V ... 30 V (EF006900) 0
Number of input ranges 1 V ... 5 V (EF006907) 0
Number of input ranges 2 V ... 10 V (EF006914) 0
Number of input ranges +5 V ... -5 V (EF006889) 0
Number of input ranges +10 V ... -10 V (EF006888) 0
Number of input ranges 5 V ... 0 V (EF006924) 0
Number of input ranges 5 V ... 1 V (EF006925) 0
Number of input ranges 10 V ... 0 V (EF006910) 0
Number of input ranges 10 V ... 2 V (EF006911) 0
Number of input ranges 0 mA ... 5 mA (EF006902) 0
Number of input ranges 0 mA ... 10 mA (EF006891) 0
Number of input ranges 0 mA ... 20 mA (EF006896) 0
Number of input ranges 4 mA ... 20 mA (EF006921) 0
Number of input ranges -5 mA ... +5 mA (EF006922) 0
Number of input ranges -10 mA ... +10 mA (EF006908) 0
Number of input ranges -20 mA ... +20 mA (EF006916) 0
Number of input ranges 20 mA ... 0 mA (EF006918) 0
Number of input ranges 20 mA ... 4 mA (EF006919) 0
Number of output ranges -60 mV ... +60 mV (EF006880) 0
Number of output ranges -100 mV ... +100 mV (EF006865) 0
Number of output ranges -300 mV ... +300 mV (EF006873) 0
Number of output ranges -500 mV ... +500 mV (EF006879) 0
Number of output ranges -1 V ... +1 V (EF006859) 0
Number of output ranges -2 V ... +2 V (EF006866) 0
Number of output ranges -2.5 V ... +2.5 V (EF006868) 0
Number of output ranges -5 V ... +5 V (EF006876) 0
Number of output ranges -10 V ... +10 V (EF006862) 0
Number of output ranges -20 V ... +20 V (EF006870) 0
Number of output ranges 0 mV ... 60 mV (EF006858) 0
Number of output ranges 0 mV ... 100 mV (EF006846) 0
Number of output ranges 0 mV ... 200 mV (EF006851) 0
Number of output ranges 0 mV ... 300 mV (EF006854) 0
Number of output ranges 0 mV ... 500 mV (EF006857) 0
Number of output ranges 0 V ... 1 V (EF006843) 0
Number of output ranges 0 V ... 2 V (EF006847) 0
Number of output ranges 0 V ... 2.5 V (EF006848) 0
Number of output ranges 0 V ... 5 V (EF006856) 0
Number of output ranges 0 V ... 10 V (EF006845) 0
Number of output ranges 0 V ... 20 V (EF006850) 0
Number of output ranges 0 V ... 24 V (EF006852) 0
Number of output ranges 0 V ... 30 V (EF006853) 0
Number of output ranges 1 V ... 5 V (EF006860) 0
Number of output ranges 2 V ... 10 V (EF006867) 0
Number of output ranges +5 V ... -5 V (EF006842) 0
Number of output ranges +10 V ... -10 V (EF006841) 0
Number of output ranges 5 V ... 0 V (EF006877) 0
Number of output ranges 5 V ... 1 V (EF006878) 0
Number of output ranges 10 V ... 0 V (EF006863) 0
Number of output ranges 10 V ... 2 V (EF006864) 0
Number of output ranges 0 mA ... 5 mA (EF006855) 0
Number of output ranges 0 mA ... 10 mA (EF006844) 0
Number of output ranges 0 mA ... 20 mA (EF006849) 0
Number of output ranges 4 mA ... 20 mA (EF006874) 0
Number of output ranges -5 mA ... +5 mA (EF006875) 0
Number of output ranges -10 mA ... +10 mA (EF006861) 0
Number of output ranges -20 mA ... +20 mA (EF006869) 0
Number of output ranges 20 mA ... 0 mA (EF006871) 0
Number of output ranges 20 mA ... 4 mA (EF006872) 0
Number of channels (EF000259) 1
Malfunction message output (EF007499) No
Inherently safe according to EN 60947-5-6 NAMUR (EF007112) No
Height (EF000040) 107.8 mm
Width (EF000008) 17.5 mm
Depth (EF000049) 113.7 mm
Power consumption (EF000346) 2 W
Operating temperature (EF002393) -40 °C
Type of electric connection (EF003961) Other
Mounting method (EF000003) Snap mounting support rail
Degree of protection (IP) (EF005474) IP20

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.