> PHOENIX CONTACT > Field Device Connectors (FDC) > 1543918
PHOENIX CONTACT M23-12P2N12W500S M23-12P2N12W500S 1543918 PHOENIX CONTACT M23, Conect. plug. to be apar. front wall, series: M23 PRO Signal, .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

M23-12P2N12W500S 1543918 PHOENIX CONTACT M23, Conect. plug. to be apar. front wall, series: M23 PRO Signal, ..

M23-12P2N12W500S

1543918

PHOENIX CONTACT

1 Pcs.

M23, Conect. plug. to be apar. front wall, series: M23 PRO Signal, straight, shielded: yes, for quick ONECLICK and standard lock, No. of poles: 12, Direction of rotation: Opposite movement, type of contact connection: Male, Solder connection, 4x Ø 3.2, flange measurement: 26 mm x 26 mm, coding: N, The item does not contain lead according to the RoHS II directive without exception 6c (Pb&lt.; 0.1 %) M23, Conect. plug. for apar. wall front, M23 PRO, straight, for ONECLICK quick lock and standard, No. of poles: 12, Direction of rotation: Counter movement, contact type: Male, Weld connection, 4x Ø 3.2, flange size: 26mm x 26mm, coding: N, The article does not contain lead according to the RoHS II directive without the exception 6c (Pb< 0.1%) M23, Device connector front mounting, series: M23 PRO Signal, straight, for standard and ONECLICK fast locking system, No. of pos.: 12, Direction of rotation: Counter direction, contact connection type: Pin, Solder connection, 4x Ø 3.2, flange dimensions: 26 mm x 26 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%)

Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
GeneralPlease observe the derating curve.
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product typeCircular connectors (device side)
Connector
Insulating body
CodingN
Insulation body materialPA 6.6
Contact materialCuZn
Contact surface materialNi/Au
Connection methodSolder connection
Contact switching typePin
ApplicationSignal
Number of positions12
Direction of rotationCounter direction
Connection profile12
Contact diameterSignal contacts1 mm
Litz wire cross-sectionSignal contactsmin.0.08 mm²
Litz wire cross-sectionSignal contactsmax.1 mm²
Nominal current per signal contact8 A
Notefor max. connection cross section
Rated voltage Signal contact150 V
Rated surge voltage2.5 kV
Overvoltage categoryIII
Degree of pollution3
Installation height2000 m
Housing
Housing materialGD-Zn
Flange dimensions26 mm x 26 mm
Type of lockingfor standard and ONECLICK fast locking system
Pg screw connectionnone
Degree of protection (plugged in)IP66 / IP68 (2 m / 24 h)
Thread typeM23
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP68
Ambient temperature (operation)-40 °C ... 105 °C (see to derating)
Altitude2000 m
Permanent temperature125 °C (DIN EN 60512-9-2 / 1000 h)

ETIM for 1543918 Connectors (EC002635)
Feature Name Feature Value
Number of data contacts (EF012232) 0
Number of power contacts (EF012216) 0
Ambient temperature (EF002386) -40 °C
Type of locking (EF000208) Other
With protective conductor (EF007468) No
Screened (EF000881) No
With status indication (EF001602) No

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.