View larger
HC-K12/2-ESTC-WS
1497713
PHOENIX CONTACT
700 Pcs.
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
| General | For HEAVYCON-ADVANCE and HEAVYCON housings of B16/B32 construction, power contacts: CK 4.0-ED, control contacts: CK 1.6-ED (crimped contacts not included in the scope of delivery) |
| General | The connectors should be operated only without load/voltage. |
| Installation instructions | Proper use requires mounting in a housing with IP54 or higher degree of protection |
| Connection type | Crimp connection |
| Construction | B16 |
| B32 | |
| Product Type | Fixed pole contact insert |
| Number of poles | 14 |
| Plug Face | 12+2+PE |
| Number of Power Contacts | 12 |
| Number of control contacts | 2 |
| Type of contact material | Machining |
| Series | HC-K |
| Insulation Properties | |
| Surge Category | Iii |
| Degree of pollution | 3 |
| Dimension Scheme | ![]() |
| Width | 34 mm |
| Height | 39.6 mm |
| Longitude | 84.5 mm |
| Horizontal Hole Spacing | 77.5 mm |
| Mechanical Parameters | |
| Contact Diameter | 4 mm |
| Connection technology | |
| Connection technology | Crimp Connection (Power Contacts) |
| Crimp Connection (Control Contacts) | |
| Connecting Conductors | |
| Connection Section | 1.5 mm² ... 6 mm² (Power Contacts) |
| 0.14 mm² ... 2.5 mm² (Control contacts) | |
| AWG Connection Section | 16 ... 10 (Power Contacts) |
| 26 ... 14 (Command Contacts) | |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| 0.5 Nm ... 0.8 Nm (HEAVYCON housing-mounting fixing screws) | |
| Length to be de-isolated from the individual conductor | 9 mm (Capacity 1.5 mm²|... 2.5 mm²) |
| 8 mm (Control contacts, with a cross-section of 0.14 mm² ... 1.5 mm²) | |
| 9.5 mm (power contacts, with a cross-section of 4 mm² ... 6 mm²) | |
| 6 mm (Control contacts, with a cross-section of 2.5 mm²) | |
| Sizing voltage (III/3) | 690 V (Power Contacts) |
| 250 V (Control Contacts) | |
| Dimensioning Transient Voltage | 8 kV (Power Contacts) |
| 4 kV (Control Contacts) | |
| Rated Current | 40 A (Power Contacts) |
| 10 A (Control Contacts) |
| Flammability class according to UL 94 | V0 |
| Contact material | Cu Alloy |
| Contact Support Material | PC |
| Material: Contact Surface, Power Contact | Ag |
| Material: contact surface, control contact | Ag (alternatively Au) |
| Environmental conditions | |
| Ambient Temperature (Service) | -40 °C ... 125 °C |
| Feature Name | Feature Value |
|---|---|
| Number of power contacts (EF012216) | 12 |
| Number of control contacts (EF012217) | 2 |
| Contact insert without contacts (EF007324) | Yes |
| Contact type (EF001587) | Pin |
| Number of poles (EF001391) | 14 |
| Diameter plug-in contact (EF007320) | 4 mm |
| Material connector insert (EF007545) | Thermoplastic |
| Rated current In (EF008250) | 40 A |
| Ambient temperature (EF002386) | 125 °C |
| Operating temperature (EF002393) | -40 °C |
| Rated voltage (EF000228) | 690 V |
| Rated surge voltage (EF002993) | 8 kV |
| Over voltage category (EF006785) | III |
| Pollution degree (EF006786) | 3 |
| Type of electric connection (EF003961) | Crimp connection |
| With wire protection (EF000550) | No |
| Connectable conductor cross section fine-strand without cable end sleeve (EF007341) | 1.5 mm² |
| Connectable conductor cross section multi-wired (EF007343) | 1.5 mm² |
| Material of contact surface (EF004020) | Other |
| Material of contact insert (EF008521) | Thermoplastic |
| Material contact (EF007544) | Other copper alloys |
| Inflammability class of insulation material according to UL94 (EF002521) | V0 |
| With protective conductor (EF007468) | Yes |
| Min. number of insertion cycles (EF012212) | 500 |
| Width (EF000008) | 34 mm |
| Height (EF000040) | 39.6 mm |
| Depth (EF000049) | 84.5 mm |