View larger
HC-K12/2-EBUC-WS
1497720
PHOENIX CONTACT
700 Pcs.
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
| General notes | For HEAVYCON-ADVANCE enclosure and HEAVYCON enclosure B16/B32 series, power contacts: CK 4.0-ED, control contacts: CK 1.6-ED (crimp contacts not supplied) |
| General notes | The connectors can only be pulled out when there is no load/voltage. |
| Installation instructions | Can be used for installation in an enclosure rated IP54 or higher |
| Link | Crimp Connection |
| type | B16 |
| B32 | |
| Product Type | Fixed-pole contact insert |
| No. of poles | 14 |
| Insertion plan | 12+2+XP |
| Number of power contacts | 12 |
| Number of control contacts | 2 |
| Contact Type | Turned |
| Series | HC-K |
| Insulation characteristics | |
| Overvoltage Category | Iii |
| Degree of pollution | 3 |
| Dimensioned Drawing | ![]() |
| width | 34 mm |
| height | 39.6 mm |
| length | 84.5 mm |
| Horizontal hole spacing | 77.5 mm |
| Mechanical characteristics | |
| Contact Diameter | 4 mm |
| Connection technology | |
| Connection technology | Crimp Connection (Power Contacts) |
| Crimp Connection (Control Contacts) | |
| Conductor connection | |
| Connection section | 1.5 mm² ... 6 mm² (Power contacts) |
| 0.14 mm² ... 2.5 mm² (Control contacts) | |
| AWG Connection Section | 16 ... 10 (Power Contacts) |
| 26 ... 14 (Control Contacts) | |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| 0.5 Nm ... 0.8 Nm (Fixing screws for mounting in the HEAVYCON enclosure) | |
| Stripping length in individual conductors | 9 mm (Power 1.5 mm²|... 2.5 mm²) |
| 8 mm (Control contacts with a cross-section of 0.14 mm² ... 1.5mm²) | |
| 9.5 mm (power contacts with a cross-section of 4 mm² ... 6 mm²) | |
| 6 mm (Control contacts, with a cross-section of 2.5 mm²) | |
| Sizing voltage (III/3) | 690 V (Power contacts) |
| 250 V (Control contacts) | |
| Sizing Impulse Voltage | 8 kV (Power Contacts) |
| 4 kV (Control contacts) | |
| Rated current | 40 A (Power Contacts) |
| 10 A (Control contacts) |
| Combustibility class according to UL 94 | V0 |
| Contact Material | Cu Alloy |
| Contact Insert Material | PC |
| Contact Surface Material, Power Contact | Ag |
| Contact surface material, control contact | Ag (alternatively Au) |
| Environmental conditions | |
| Ambient temperature (operating) | -40 °C ... 125 °C |
| Feature Name | Feature Value |
|---|---|
| Number of power contacts (EF012216) | 12 |
| Number of control contacts (EF012217) | 2 |
| Contact insert without contacts (EF007324) | No |
| Contact type (EF001587) | Bus |
| Number of poles (EF001391) | 14 |
| Diameter plug-in contact (EF007320) | 4 mm |
| Material connector insert (EF007545) | Thermoplastic |
| Rated current In (EF008250) | 40 A |
| Ambient temperature (EF002386) | 125 °C |
| Operating temperature (EF002393) | -40 °C |
| Rated voltage (EF000228) | 690 V |
| Rated surge voltage (EF002993) | 8 kV |
| Over voltage category (EF006785) | III |
| Pollution degree (EF006786) | 3 |
| Type of electric connection (EF003961) | Crimp connection |
| With wire protection (EF000550) | No |
| Connectable conductor cross section fine-strand without cable end sleeve (EF007341) | 1.5 mm² |
| Connectable conductor cross section multi-wired (EF007343) | 1.5 mm² |
| Material of contact surface (EF004020) | Other |
| Material of contact insert (EF008521) | Thermoplastic |
| Material contact (EF007544) | Other copper alloys |
| Inflammability class of insulation material according to UL94 (EF002521) | V0 |
| With protective conductor (EF007468) | Yes |
| Min. number of insertion cycles (EF012212) | 500 |
| Width (EF000008) | 34 mm |
| Height (EF000040) | 39.6 mm |
| Depth (EF000049) | 84.5 mm |