View larger
FL SWITCH 2303-8SP1
1278397
PHOENIX CONTACT
1 Pcs.
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
| Dimension Scheme | ![]() |
| Width | 45 mm |
| Height | 130 mm |
| Depth | 119 mm |
| General | Telephone and on-site support (for a fee) |
| Shell material | Fiber-reinforced polycarbonate |
| Type of mounting | Rail mounting |
| Ethernet (RJ45) | |
| Connection type | RJ45 |
| Note about the connection type | Autonegoation and Autocrossing |
| Transmission speed | 10/100/1000 MBit/s |
| Transmission Physics | copper |
| Transmission Length | 100 m (per segment) |
| Signal LEDs | Data Receiving, Link Status |
| Number of channels | 3 (RJ45 ports) |
| Ethernet (SPE) | |
| Connection type | SPE |
| Note about the connection type | 10BASE T1L |
| PoDL Power Class 11 | |
| Transmission speed | 10 MBit/s (duplex) |
| Transmission Physics | copper |
| Transmission Length | 1000 m (per segment) |
| Signal LEDs | Data Receiving, Link Status |
| Number of channels | 8 (SPE Ports) |
| Construction | Sample book |
| Product Type | Switch |
| Product Family | Managed Switch 2000 |
| MTTF | 185.12 Years (SN 29500 standard, temperature 25 °C, duty cycle 21%) |
| 122.03 Years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) | |
| 25.3 Years (SN 29500 standard, temperature 70 °C, duty cycle 100%) | |
| Special Features | Extended temperature range, Single Pair Ethernet ports with PoDL |
| Signal Delay | ≥ 1.9 μs (Store-and-Forward mode, 10/100/1000 MBit/s, depending on frame size) |
| Insulation Properties | |
| Kind of protection | III (VDE 0106) |
| Degree of pollution | 2 |
| Switch Functions | |
| Diagnostic functions | RMON History |
| LLDP (Link Layer Discovery Protocol) | |
| SNMP-Traps | |
| N:1-Portmirroring | |
| ACD (Address Conflict Detection) | |
| SysLog | |
| CRC-Surveillance | |
| Basic Functionality | Switch Store and Forward, IEEE 802.3 compliant |
| PROFINET conformity class | Conformance-Class B |
| Function of the PROFINET module | PROFINET Device |
| Fast Startup | |
| Filter Functions | Quality of Service (8 priority classes) |
| Class of Service | |
| DiffServ/DSCP | |
| Port-Priorisierung | |
| VLANs (up to 32 VLANs) | |
| IGMP Snooping/Querier (v1/v2) | |
| Auto-Query-Port | |
| Extended Multicast Filtering | |
| IP Parameterization | DHCP-Client |
| DHCP Option 82 (Relay Agent) | |
| DHCP server (pool-based, port-based) | |
| BootP | |
| DCP (Discovery and Configuration Protocol) | |
| MAC Address Table | 8k |
| Management | Web-based management (HTTP/HTTPS) |
| Role-based user management (LDAP, RADIUS) | |
| SNMPv1/v2/v3 | |
| Command Line Interface (Telnet, SSH) | |
| Redundancy | MRP (Media Redundancy Protocol) |
| RSTP (Rapid Spanning Tree Protocol) | |
| FRD (Fast Ring Detection) | |
| Large Tree Support | |
| LACP (Link Aggregation Control Protocol) | |
| PROFINET S2 System Redundancy | |
| Status and Diagnostic Indications | LEDs: US1, US2 (Power Supply), Fail (Alarm Contact), 2 LEDs for each Ethernet port (Link/Activity and Speed) |
| Other Functions | MMS & GOOSE Transmission (IEC 61850-8-1) |
| Modbus/TCP Transmission | |
| Time Synchronization | SNTP (Simple Network Time Protocol) |
| Security Features | |
| Port Security | MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass |
| Basic Functionality | Switch Store and Forward, IEEE 802.3 compliant |
| Power Consumption | 65 W (Vin= max, tAMB= Max, IPSE= 8x IPoDLmax, 100% data traffic on all connected ports) |
| Local diagnosis | US1/2 Supply Voltage US1, US2 Green LED |
| FAIL Div. Red LED | |
| LINK Status Link Green LED | |
| Maximum Dissipated Power with Nominal Condition | 12 W (Vin= max, tAMB= Max, IPSE= 8x IPoDLmax, 100% data traffic on all connected ports) |
| Test voltage | 500 V DC |
| Verification path | 1 minute at FE 500 V DC |
| One minute between logic and Ethernet 2.25 kV DC | |
| One minute between PoDL and 2.25 kV DC logic | |
| Transmission Medium | copper |
| Feeding | |
| Supply voltage (DC) | 24 V DC (Simultaneous PoDL power supply according to IEEE 802.3cg) |
| Supply voltage | 20 V DC ... 32 V DC |
| Power connection | via COMBICON, max. conductor cross-section 1.5 mm² |
| Residual ripple | 3.6 VPP(within the permissible voltage range) |
| Maximum Current Absorption | 2.2 A (Us= Min, TAMB= Max, SPE = 8x max. PoDL Power, 100% data traffic on all connected ports) |
| Typical Current Absorption | 1.03 A (to Us= Nom, TAMB= 25°C, SPE = 4x max. PoDL Power, 100% data traffic on all connected ports) |
| Connection type | Push-in spring connection |
| Note about the connection type | Use only copper conductors with the permissible temperature range (-40 °C ... 75 °C). |
| Rigid conductor section | 0.25 mm² ... 1.5 mm² |
| Flexible conductor section | 0.25 mm² ... 1.5 mm² |
| AWG Conductor Section | 24 ... 16 |
| Length to be de-insulated | 9 mm |
| Environmental conditions | |
| Protection Index | IP20 |
| Ambient Temperature (Service) | -40 °C ... 70 °C |
| Ambient Temperature (Storage/Transport) | -40 °C ... 85 °C |
| Permissible air humidity (service) | 10 % ... 95% (non-condensing) |
| Permissible air humidity (storage/transport) | 10 % ... 95% (non-condensing) |
| Crashes (in service) | 30g (EN 60068-2-27) |
| Vibration (service) | according to IEC 60068-2-6: 5g, 150 Hz |
| Air Pressure (Service) | 80 kPa ... 110 kPa up to 2000 m above sea level (No derating) |
| Air Pressure (Storage/Transport) | 79 kPa ... 108 kPa up to 2000 m above sea level (No derating) |
| Free of disturbing varnish wetting substances | Yes |
| Compliance with EMC directives | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
| EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A | |
| EN 61000-6-2 EN 61000-4-4 (EFT/Burst) Criterion B, I/O cables up to 2.2 kV | |
| EN 61000-6-2 EN 61000-4-5 (Arises) Criterion B | |
| EN 61000-6-2 EN 61000-4-6 (Conducted Disturbances) Criterion A | |
| EN 61000-6-4 EN 61000-6-4 (interference emission) Class A | |
| EN 61000-6-4 EN 61000-6-4 (Cable Interference Emission) Class A | |
| Interference resistance | EN 61000-6-2 |
| Electromagnetic compatibility | Compliance with EMC Directive 2014/30/EU |
| Interference emission | EN 61000-6-4 |
| Functionality | |
| Basic Functionality | Switch Store and Forward, IEEE 802.3 compliant |
| Status Indication | LEDs: US1, US2 (Power Supply), Fail (Alarm Contact), 2 LEDs for each Ethernet port (Link/Activity and Speed) |
| Feature Name | Feature Value |
|---|---|
| Ethernet (EF003535) | Yes |
| Number of other ports (EF007643) | 8 |
| Mounting method (EF000003) | Other |
| Manageable (EF004912) | Yes |
| Degree of protection (IP) (EF005474) | IP20 |
| Height (EF000040) | 130.6 mm |
| Width (EF000008) | 45 mm |
| Depth (EF000049) | 125.00042 mm |