> PHOENIX CONTACT > Field Device Connectors (FDC) > 1130816
PHOENIX CONTACT ES-FT-BPC-B 16-25 OG ES-FT-BPC-B 16-25 OG 1130816 PHOENIX CONTACT Connector, Family of articles: BPC, color: orange, number of po.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

ES-FT-BPC-B 16-25 OG 1130816 PHOENIX CONTACT Connector, Family of articles: BPC, color: orange, number of po..

ES-FT-BPC-B 16-25 OG

1130816

PHOENIX CONTACT

15 Pcs.

Connector, Family of articles: BPC, color: orange, number of poles: 1, nominal voltage: 1500, assigned current: 120 A, Connection type: Screw connection High voltage connector for new energy storage system, rated voltage: 1500 V, assigned current: 120 A, wiring method: crimping; contact surface: silver: orange positive pole, black negative pole; with male connector and female connector. Connector, Range of articles: BPC, color: orange, number of positions: 1, rated voltage: 1500, rated current: 120 A, Connection method: Screw connection, Contact connection type: Pin

Connectors > Modular connector (industrial connector)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Safety note
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Product properties
Product typeConnectors for energy storage
Product familyBPC
Number of positions1
Insulation characteristics
Degree of pollution2
Electrical properties
Rated voltage (III/2)1500 V DC
Nominal voltage ATD1500 (III/2) in accordance with IEC 61984
1000 in accordance with UL 4128
Rated current120 A (with 25 mm² conductor cross-section, in accordance with IEC 61984)
76 A (with 16 mm² conductor cross-section, in accordance with IEC 61984)
120 A (with AWG 4, in accordance with UL 4128)
Contact resistance≤ 5 mΩ
Nominal voltage UN1000 V (in accordance with UL 4128)
Connection data
Connection methodScrew connection
Cross section AWG(converted acc. to IEC)
Material specifications
Colororange
MaterialPolyamide
Copper
Silicon
Flammability rating according to UL 94V0
Cable/line
Tightening torque, union nut3.00 Nm
Cable pull-out force≥ 10 N
Mechanical properties
Mechanical data
Insertion/withdrawal cycles100
Insertion force≤ 75 N
Withdrawal force≥ 10 N
Environmental and real-life conditions
Ambient conditions
Degree of protection (when plugged in)IP65 (The panel is feed-through hole)
Degree of protection (not plugged in)IP20
Degree of protectionIP65
Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 70 °C
Standards and regulations
Standards/specificationsIEC 61984:2008
EN 61984:2008
UL 4128
PPP 51090A
Mounting
Connection methodScrew connection

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.