> PHOENIX CONTACT > INTERFACE Components (IF) > 1201613
PHOENIX CONTACT CSS 0.75-1/3-EMC CSS 0.75-1/3-EMC 1201613 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

CSS 0.75-1/3-EMC 1201613 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and..

CSS 0.75-1/3-EMC

1201613

PHOENIX CONTACT

1 Pcs.

Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.75 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input, with integrated antiparasitic filter Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.75 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input, with integrated EMC filter

Automation > Speed controller
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Product properties
Product typeSpeed starter
Product familyCONTACTRON
Operating elementsPush button
Rotary switch
Insulation characteristics
Pollution degree2
Electrical properties
Number of phases1
Input data
Mains
Number of phases1
Input voltage230 V AC
240 V AC
Input voltage range110 V AC ... 240 V AC -15 % ... +10 %
Frequency range47 Hz ... 63 Hz
Nominal current9.1 A (no line reactor)
8.3 A (with line reactor)
Output data
Nominal motor power0.75 kW
Apparent power1.7 kVA
Nominal output current (IN)4.3 A (4 kHz)
3.5 A (8 kHz)
2.4 A (16 kHz)
Output frequency0 Hz ... 500 Hz
Power dissipation38 W (2 kHz)
43 W (4 kHz)
41 W (8 kHz)
39 W (16 kHz)
9 W (stand by)
Output current≤ 6.45 A (180 s)
≤ 3.225 A (180 s, during recovery time)
≤ 7.74 A (15 s)
≤ 2.15 A (15 s, during recovery time)
Recovery time150 s (180 s)
12 s (15 s)
Overload time30 s (180 s)
3 s (15 s)
Discharge time3 min. (Intermediate circuit capacitors)
Switching
Output nameRelay output
Contact switching type1 changeover contact
Maximum switching voltage125 V AC
30 V DC
Maximum inrush current3 A
Inrush current, minimum10 mA (5 V DC)
Connection data
Cross section AWG(converted acc. to IEC)
Power-level terminals
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 6 mm²
Conductor cross section flexible0.2 mm² ... 6 mm²
0.2 mm² ... 4 mm² (with ferrule)
Conductor cross section AWG24 ... 10
Control terminals
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible0.2 mm² ... 1.5 mm²
0.2 mm² ... 0.75 mm²
Conductor cross section AWG24 ... 16
Dimensions
Drill hole
Diameter5.5 mm
Width45 mm
Height210 mm
Depth210 mm
Length≤ 20 m (Motor cable length (EMC compliance category C2))
≤ 20 m (Motor cable length (EMC compliance category C3))
≤ 50 m (Motor cable length (no EMC compliance))
Environmental and real-life conditions
Ambient conditions
Degree of protection (IP)IP20
Degree of protection (NEMA)NEMA 1
Ambient temperature (operation)-20 °C ... 55 °C (without current derating)
-20 °C ... 60 °C (with linear current derating)
Ambient temperature (storage/transport)-25 °C ... 85 °C
Altitude≤ 2000 m
> 2000 m (with derating)
Permissible humidity (operation)90 % (non-condensing)
Permissible humidity (storage/transport)95 % (non-condensing)
Shock (operation)15g, 11 ms
Vibration (operation)0,075 mm / 1g
Air pressure (operation)86 kPa ... 106 kPa
Air pressure (storage/transport)70 kPa ... 106 kPa
Approvals
Safety Integrity Level (SIL, IEC 61800-5-2)
Identification3
Performance Level (EN ISO 13849)
Identificatione
Category (ISO 13849)
Identification4
Standards and regulations
Standards/regulationsIEC 61800-5-1
IEC 61800-3
Mounting
Mounting typeDIN rail mounting
Wall mounting

ETIM for 1201613 Modular devices for distribution board/surface mounting (EC000256)
Feature Name Feature Value
Mounting method (EF000003) Other
Colour (EF000007) Grey
RAL-number (EF000116) 7042
Nominal current (EF000001) 9.1 A
Number of phases (EF000351) 1
Power control stepless (EF000661) Yes
Number of steps (EF002426) 2
Basic element without cover (EF008182) No
Method of operation (EF000006) Push button/touch control button
Lighting (EF000134) None
Switching contact (EF001141) Yes
With temperature sensor (EF006034) No
Height (EF000040) 210 mm
Width (EF000008) 45 mm
Depth (EF000049) 210 mm
Degree of protection (IP) (EF005474) IP20

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.