> PHOENIX CONTACT > Trabtech (TT) > 2800190
PHOENIX CONTACT VAL-MS-T1/T2 335/12.5 ST VAL-MS-T1/T2 335/12.5 ST 2800190 PHOENIX CONTACT Type 1/2 surge protection plug View larger
Images are for illustrative purposes only. Please refer to data sheet for details

VAL-MS-T1/T2 335/12.5 ST 2800190 PHOENIX CONTACT Type 1/2 surge protection plug

VAL-MS-T1/T2 335/12.5 ST

2800190

PHOENIX CONTACT

10 Pcs.

Type 1/2 surge protection plug Replacement L-N connector for lightning current and plug-in surge discharger VAL-MS-T1/T2 335/12.5. L-N replacement plug for VAL-MS-T1/T2 335/12.5 plug-in lighting/surge arrester.

Automation > Accessories/spare parts for surge protection power supply systems
Trabtech (TT)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Product properties
Product typeReplacement plug
Product familyVALVETRAB MS
IEC test classificationI / II
T1 / T2
EN typeT1 / T2
IEC power supply systemTN-C
TN-S
TT
TypeDIN rail module, two-section, divisible
Number of positions1
Surge protection fault messageoptical
Data management status
Article revision07
Insulation characteristics
Overvoltage categoryIII
Pollution degree2
Electrical properties
Nominal frequency fN50 Hz (60 Hz)
Connection data
Connection methodpluggable
Dimensions
Dimensional drawingeghtzmoipk.jpg
Width17.7 mm
Height47 mm
Depth67.3 mm
Horizontal pitch1 Div.
Material specifications
Colorblack (RAL 9005)
Flammability rating according to UL 94V-0
CTI value of material600
Insulating materialPA 6.6/PBT
Material groupI
Housing materialPA 6.6
PBT
Protective circuit
Mode of protectionL-N
L-PEN
Direction of actionL-N / L-PEN
Nominal voltage UN240/415 V AC (TN-C, TN-S)
240/415 V AC (TT)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC335 V AC
Residual current IPE≤ 800 µA
Standby power consumption PC≤ 270 mVA
Nominal discharge current In(8/20) µs12.5 kA
Maximum discharge current Imax(8/20) µs50 kA
Impulse discharge current (10/350) µs, charge6.25 As
Impulse discharge current (10/350) µs, specific energy39 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp12.5 kA
Short-circuit current rating ISCCR25 kA
Voltage protection level Up≤ 1.2 kV
≤ 1.6 kV (30 kA - 8/20 µs)
Residual voltage Ures≤ 1.2 kV (at In)
≤ 1.1 kV (at 10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3 kA)
TOV behavior at UT415 V AC (5 s / withstand mode)
457 V AC (120 min / safe failure mode)
Response time tA≤ 25 ns
Max. backup fuse with branch wiring160 A (gG)
Additional technical data
Maximum discharge current Imax(8/20) µs65 kA
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl)
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Approvals
UL specifications
Maximum continuous operating voltage MCOV (L-N)335 V AC
Nominal discharge current In(L-N)20 kA
Mode of protectionL-N
Nominal voltage240 V AC
Power distribution systemSingle phase
Nominal frequency50/60 Hz
Measured limiting voltage MLV (L-N)2630 V
SPD Type4CA
Standards and regulations
Standards/specificationsIEC 61643-11
Note2011
EN 61643-11
Standards/specificationsEN 61643-11
Note2012
Mounting
Mounting typeon base element

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.