> PHOENIX CONTACT > Industrial Relays > 2900260
PHOENIX CONTACT PLC-BPT-24DC/ 1IC/ACT PLC-BPT- 24DC/ 1IC/ACT 2900260 PHOENIX CONTACT Relay base View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-BPT- 24DC/ 1IC/ACT 2900260 PHOENIX CONTACT Relay base

PLC-BPT-24DC/ 1IC/ACT

2900260

PHOENIX CONTACT

10 Pcs.

Relay base 14 mm PLC base terminal block for high clamping currents with push-in connection, without relay or solid-state relay equipment, for mounting on NS 35/7.5 rail, with load return line (BB) connection, 1 closing contact, input voltage 24 V DC

Automation > Relay socket
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲

Key Commercial Data

Orderkey2900260
Packing unit10 pc
GTIN4046356512398
Weight per Piece (excluding packing)44.100 g
Custom tariff number85366990
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area
NoteSeparating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.
The PLC-ATP separating plate should be installed for safe isolation between adjacent modules
The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m

Input data

Nominal input voltage UN24 V DC
Protective circuitDamping diode
Polarity protection diode

Output data

Compatible componentsMiniature relay, REL-MR-24DC/1IC/ACT; miniature optocoupler, OPT-24DC/24DC/5, OPT-24DC/230AC/2

Connection data 1

Connection nameInput side
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1 mm² ()
Conductor cross section AWG26 ... 14

Connection data 2

Connection nameOutput side
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1 mm² ()
Conductor cross section AWG26 ... 14

General

NoteSeparating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.
The PLC-ATP separating plate should be installed for safe isolation between adjacent modules
The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Colorgray
Operating mode100% operating factor
Mounting positionany
Assembly instructionsIn rows with zero spacing
Test voltage relay winding/relay contact4 kVrms(50 Hz, 1 min.)
Degree of protectionIP20
Min. degree of protection of inst. locationIP54

Standards and Regulations

Connection in acc. with standardCUL
Standards/regulationsEN 50178
EN 61810-1
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Degree of pollution2
Overvoltage categoryIII
Flammability rating according to UL 94V0

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


ETIM for 2900260 Relays (EC001456)
Feature Name Feature Value
Type of electric connection (EF003961) Other
Mounting method (EF000003) Other
With detachable clamps (EF003340) No
Function extension possible (EF003444) No
Number of pins (EF005580) 8
Width (EF000008) 14 mm
Height (EF000040) 80 mm
Depth (EF000049) 94 mm

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.