View larger
UMK- 1 OM-R/AMS 2983002 PHOENIX CONTACT Optocoupler module
UMK-1 OM-R/AMS
2983002
PHOENIX CONTACT
1 Pcs.
Automation > Optocoupler
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
An optocoupler module such as the Phoenix Contact UMK-1 OM-R/AMS acts as an interface component that safely couples control logic with higher-power switching loads in industrial control panels. These devices protect sensitive electronic controllers by providing complete electrical isolation and reliable signal conversion across diverse industrial setups. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Solid-state relay module
- Operating mode: 100% operating factor
- With components: yes
- Data management status Article revision: 05
- Insulation characteristics Overvoltage category: III
- Pollution degree: 2
- Rated surge voltage: 8 kV
- Nominal input voltage U N: 24 V DC
- Input voltage range: 4 V ... 32 V
- Typical input current at U N: 2 mA (without plug-in module)
- Protective circuit: Reverse polarity protection; Polarity protection diode
- Status display/channel: Yellow LED
- Switching Contact switching type: 1 N/O contact (double contact)
- Maximum switching voltage: 230 V AC
- Minimum switching voltage: 24 V AC
- Limiting continuous current: 5 A
More info
▲| Product type | Solid-state relay module |
| Operating mode | 100% operating factor |
| With components | yes |
| Data management status | |
| Article revision | 05 |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Rated surge voltage | 8 kV |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 4 V ... 32 V |
| Typical input current at UN | 2 mA (without plug-in module) |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Surge protection; Suppressor diode | |
| Status display/channel | Yellow LED |
| Switching | |
| Contact switching type | 1 N/O contact (double contact) |
| Maximum switching voltage | 230 V AC |
| 550 V AC | |
| Minimum switching voltage | 24 V AC |
| Limiting continuous current | 5 A |
| Error detection (line break / short-circuit) | no |
| Input | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Number of connections | 1 |
| Number of positions | 2 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Output | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Number of connections | 1 |
| Number of positions | 2 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
| Status display present | Yes |
| Dimensional drawing | |
| Width | 22.5 mm |
| Height | 77 mm |
| Depth | 72 mm |
| Color | green (RAL 6021) |
| Housing insulation material | PVC, side panel PA non-reinforced, |
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Standards/regulations | DIN EN 50178 |
| Mounting type | DIN rail mounting |
| Assembly note | in rows with zero spacing |
| Mounting position | any |