View larger
VS-09-A BK 1658079 PHOENIX CONTACT D-SUB panel mounting frames
VS-09-A BK
1658079
PHOENIX CONTACT
5 Pcs.
Connectors > Fixing element for industrial connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact D-SUB panel mounting frames (VS-09-A BK) is an industrial structural element designed to mount and house interface connectors securely on control panels, distribution boxes, and machinery housings. Such frames provide a stable physical interface for data and signal lines, supporting organized cable management and safeguarding connection points against mechanical strain. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Panel-mount frame
- Application: Modular insert
- Type: Shell size 1
- Connection profile: unassembled
- Type: RJ45
- Data management status Article revision: 03
- Insulation characteristics Degree of pollution: 2
- Width: 16.7 mm
- Height: 54 mm
- Length: 24 mm
- Material: Plastic
- Flammability rating according to UL 94: V0
- Seal material: NBR
- Housing material: Plastic
- Housing surface material: PA, light gray
- Contact surface material: Au/Ni
More info
▲| Safety note | |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| • The products are suitable for applications in plant, controller, and electrical device engineering. | |
| • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. | |
| • Assembled products may not be manipulated or improperly opened. | |
| • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). | |
| • When using the product in direct connection with third-party manufacturers, the user is responsible. | |
| • For operating voltages > 50 V AC, conductive connector housings must be grounded | |
| • Only use tools recommended by Phoenix Contact | |
| • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. | |
| • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products | |
| • Operate the connector only when it is fully plugged in and interlocked. | |
| • Operate the connector only when it is fully plugged in. | |
| • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. | |
| • Observe the minimum bending radius of the cable. Lay the cable without twisting it. | |
| • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector | |
| Product type | Panel-mount frame |
| Application | Modular insert |
| Type | Shell size 1 |
| Connection profile | unassembled |
| Type | RJ45 |
| Data management status | |
| Article revision | 03 |
| Insulation characteristics | |
| Degree of pollution | 2 |
| Dimensional drawing | |
| Width | 16.7 mm |
| Height | 54 mm |
| Length | 24 mm |
| Material | Plastic |
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Housing material | Plastic |
| Housing surface material | PA, light gray |
| Contact surface material | Au/Ni |
| Contact carrier material | Polyester GF |
| Ambient conditions | |
| Degree of protection | IP65/IP67 |
| Mounting type | Front mounting |