PHOENIX CONTACT FLKM 50-PA-S300 FLKM 50-PA-S300 2294445 PHOENIX CONTACT Front adapters View larger
Images are for illustrative purposes only. Please refer to data sheet for details

FLKM 50-PA-S300 2294445 PHOENIX CONTACT Front adapters

FLKM 50-PA-S300

2294445

PHOENIX CONTACT

1 Pcs.

Front adapters VARIOFACE front adapter, for Siemens SIMATIC® S7-300, 1 x 32 channel connection

Automation > Accessories/spare parts for controls
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact VARIOFACE front adapter (FLKM 50-PA-S300) establishes plug-and-play signal bridging between controller I/O cards and marshalling terminals. Front adapters eliminate complex point-to-point field wiring errors in high-density PLC rack installations.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Front adapter
  • Product family: VARIOFACE
  • Data management status Article revision: 10
  • Overvoltage category: II
  • Pollution degree: 2
  • Operating voltage (AC): ≤ 30 V AC
  • Operating voltage (DC): ≤ 60 V DC
  • Nominal operating mode: 100% operating factor
  • Current (per branch): ≤ 1 A
  • Current (Voltage supply via IDC/FLK): ≤ 2 A
  • Current (Voltage supply via spade connection): ≤ 8 A
  • Rated surge voltage: 0.6 kV (1.2/50 μs)
  • Connection 1 (control level) Connection method: Plug-in connection
  • Number of positions: 40
  • Connection 2 (field level) Connection in acc. with standard: IEC 60603-13
  • Connection method: IDC/FLK pin strip

More info

▲
Technical data

Product properties
Product typeFront adapter
Product familyVARIOFACE
Data management status
Article revision10
Insulation characteristics: Air clearances and creepage distances
InsulationFunctional insulation
Overvoltage categoryII
Pollution degree2

Electrical properties
Operating voltage (AC)≤ 30 V AC
Operating voltage (DC)≤ 60 V DC
Nominal operating mode100% operating factor
Current (per branch)≤ 1 A
Current (Voltage supply via IDC/FLK)≤ 2 A
Current (Voltage supply via spade connection)≤ 8 A
Air clearances and creepage distances
Rated insulation voltage63 V
Rated surge voltage0.6 kV (1.2/50 μs)
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O cardCPU 312C
CPU 313C
CPU 313C-2DP
CPU 313C-2PtP
CPU 314C-2DP
CPU 314C-2PtP
6ES7321-1BL00-0AA0
6ES7322-8BH01-0AB0
6ES7322-1BL00-0AA0
6ES7322-8BH10-0AB0
6ES7323-1BL00-0AA0
6ES7331-1KF01-0AB0
6ES7331-1KF02-0AB0
6ES7331-7NF00-0AB0
6ES7331-7NF10-0AB0
6ES7331-7PF01-0AB0
6ES7331-7PF11-0AB0
6ES7332-5HF00-0AB0
6ES7350-2AH01-0AE0
6ES7357-4AH01-0AE0

Connection data
Connection 1 (control level)
Connection methodPlug-in connection
Number of positions40
Connection 2 (field level)
Connection in acc. with standardIEC 60603-13
Connection methodIDC/FLK pin strip
Number of connections1
Number of positions50
Insertion/withdrawal cycles> 50
Pitch2.54 mm
Connection 3 (supply)
Connection methodSpade connection
Number of positions4
Note2,8 x 0,8

Dimensions
Item dimensions
Width115.01 mm
Height21.3 mm
Depth29.09 mm

Environmental and real-life conditions
Ambient conditions
Degree of protection (Module)IP00
Degree of protection (Installation location)≥ IP54
Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Altitude≤ 2000 m

Standards and regulations
Air clearances and creepage distances
Standards/regulationsEN IEC 60664-1

Mounting
Mounting typePlug-in mounting
Mounting positionany

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Notes on operationTo prevent short circuits, all wire bridges on the following I/O cards are to be separated.
There may not be any voltage supply at the front adapter.
6ES7 331-1KF01-0AB0
6ES7 331-1KF02-0AB0
6ES7 331-7NF00-0AB0
6ES7 331-7NF10-0AB0
6ES7 331-7PF01-0AB0
6ES7 331-7PF11-0AB0
6ES7 332-5HF00-0AB0
6ES7 350-2AH01-0AE0
6ES7 357-4AH01-0AE0
Notes on operationDigital I/O cards
Thanks to the existing wire bridge upon delivery, the input and output bytes are non-isolated.

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.