PHOENIX CONTACT VAL-SEC-T2-GDT-800DC-P VAL-SEC-T2-GDT-800DC-P 1052649 PHOENIX CONTACT Type 2 surge protection plug View larger
Images are for illustrative purposes only. Please refer to data sheet for details

VAL-SEC-T2-GDT-800DC-P 1052649 PHOENIX CONTACT Type 2 surge protection plug

VAL-SEC-T2-GDT-800DC-P

1052649

PHOENIX CONTACT

1 Pcs.

Type 2 surge protection plug Replacement connector for surge protection device from the VALVETRAB SEC product line for DC power sources. Ground the path for 220 and 380 V DC. Replacement plug for surge protective devices from the VALVETRAB SEC product range for DC power sources. Protection of the path to the ground for 220 und 380 V  DC.

Automation > Accessories/spare parts for surge protection power supply systems
Trabtech (TT)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

VAL-SEC-T2-GDT-800DC-P 1052649 PHOENIX CONTACT Type 2 surge protection plug devices offer specialized overvoltage protection utilizing gas discharge tube technology tailored for DC-powered industrial applications. Photovoltaic installations and DC distribution grids rely on these modular plug-ins to suppress transient voltage anomalies. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Replacement plug
  • Product family: SEC Family
  • IEC test classification: II
  • EN type: T2
  • IEC power supply system: DC
  • Type: Male
  • Number of positions: 1
  • Surge protection fault message: optical
  • Data management status Article revision: 01
  • Insulation characteristics Overvoltage category: III
  • Pollution degree: 2
  • Connection method: pluggable
  • Width: 11.7 mm
  • Height: 46.4 mm
  • Depth: 59.4 mm
  • Horizontal pitch: 0.6 Div.

More info

▲
Technical data

Notes
General
NoteThe VAL-SEC-T2-GDT-800DC-P protective plug (Item No..: 1052649) is only to be used in series connection with a VAL-SEC-T2-220DC-P (Item No..: 2907879) or VAL-SEC-T2- 380DC-P (Item No..: 2907880). It is not designed for direct use on mains voltage.
Uagn≥ 600 V

Product properties
Product typeReplacement plug
Product familySEC Family
IEC test classificationII
T2
EN typeT2
IEC power supply systemDC
TypeMale
Number of positions1
Surge protection fault messageoptical
Data management status
Article revision01
Insulation characteristics
Overvoltage categoryIII
Pollution degree2

Connection data
Connection methodpluggable

Dimensions
Dimensional drawing
Width11.7 mm
Height46.4 mm
Depth59.4 mm
Horizontal pitch0.6 Div.

Material specifications
Colorlight gray (RAL 7035)
Flammability rating according to UL 94V-0
CTI value of material600
Insulating materialPA6.6-FR 20% GF
PBT-FR
Material groupI
Housing materialPA 6.6-FR 20 % GF
PBT-FR

Protective circuit
Mode of protection(DC+/DC-) - PE
Residual current IPE≤ 5 µA
Nominal discharge current In(8/20) µs20 kA
Maximum discharge current Imax(8/20) µs40 kA
Voltage protection level Up≤ 1.5 kV
Residual voltage Ures≤ 0.5 kV (at In)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 2 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs≤ 1.5 kV
Response time tA≤ 100 ns

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 6000 m (amsl)
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

Standards and regulations
Standards/specificationsIEC 61643-11
Note2011
EN 61643-11
Standards/specificationsEN 61643-11
Note2012

Mounting
Mounting typeon base element

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.