View larger
VAL-MB-T2-1000DC-2+V-R 1376162 PHOENIX CONTACT Surge protection device, according to type 2/class II, for gr..
VAL-MB-T2-1000DC-2+V-R
1376162
PHOENIX CONTACT
1 Pcs.
Automation > Surge protection device for power supply systems
Trabtech (TT)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Identified by part number 1376162, this surge protection device, according to type 2/class II, for gr.. by Phoenix Contact serves as a primary defense barrier against transient voltage surges in specialized DC power environments. Devices of this type are routinely installed on DIN rails within control gear to protect sensitive power electronics from line disturbances.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- IEC test classification: T2
- EN type: T2
- IEC power supply system: DC
- Type: DIN rail module, one-piece
- Product type: Surge arrester
- Surge protection fault message: Optical, remote indicator contact
- Insulation characteristics Overvoltage category: III
- Pollution degree: 2
- Indicator/remote signaling Connection name: Remote fault indicator contact
- Switching function: Changeover contact
- Operating voltage: 5 V AC ... 250 V AC (Altitude ≤ 2000 m amsl)
- Operating current: 5 mA AC ... 1.5 A AC
- Cross section AWG: (converted acc. to IEC)
- Connection method: Screw connection
- Screw thread: M5
- Tightening torque: 3 Nm
More info
▲| IEC test classification | T2 |
| EN type | T2 |
| IEC power supply system | DC |
| Type | DIN rail module, one-piece |
| Product type | Surge arrester |
| Surge protection fault message | Optical, remote indicator contact |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Indicator/remote signaling | |
| Connection name | Remote fault indicator contact |
| Switching function | Changeover contact |
| Operating voltage | 5 V AC ... 250 V AC (Altitude ≤ 2000 m amsl) |
| 5 V DC ... 30 V DC (200 mA DC) | |
| Operating current | 5 mA AC ... 1.5 A AC |
| 5 mA DC ... 1 A DC | |
| Cross section AWG | (converted acc. to IEC) |
| Connection method | Screw connection |
| Screw thread | M5 |
| Tightening torque | 3 Nm |
| Stripping length | 16 mm |
| Conductor cross section flexible | 2.5 mm² ... 35 mm² |
| Conductor cross section AWG | 14 ... 2 |
| Remote fault indicator contact | |
| Connection method | Screw connection |
| Screw thread | M2 |
| Tightening torque | 0.25 Nm |
| Stripping length | 7 mm |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Dimensional drawing | |
| Width | 71.2 mm |
| Height | 120 mm |
| Depth | 65.5 mm (incl. DIN rail 7.5 mm) |
| Horizontal pitch | 4 Div. |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6 |
| PBT | |
| Housing material | PA 6.6 |
| Mode of protection | (DC+) - (DC-) |
| (DC+/DC-) - PE | |
| Direction of action | (L+)-PE & (L-)-PE & (L+)-(L-) |
| Nominal voltage UN | 1000 V DC |
| Maximum continuous voltage UC | 1100 V DC |
| Rated load current IL | 40 A |
| Residual current IPE | ≤ 100 µA DC |
| ≤ 540 µA AC | |
| Standby power consumption PC | ≤ 150 mVA |
| Nominal discharge current In(8/20) µs | 20 kA |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Total discharge current Itotal(8/20) µs | 40 kA |
| Short-circuit current rating ISCCR | min. 1 kA DC (with maximum backup fuse 40 A gG/1200 V DC) |
| max. 4 kA DC (with maximum backup fuse 40 A gG/1200 V DC) | |
| Voltage protection level Up | ≤ 4.5 kV |
| Residual voltage Ures | ≤ 4.5 kV (at In) |
| ≤ 3.3 kV (at 3 kA) | |
| ≤ 3.6 kV (at 6.25 kA) | |
| ≤ 3.8 kV (at 10 kA) | |
| ≤ 4.2 kV (at 15 kA) | |
| ≤ 5.4 kV (at 40 kA) | |
| Response time tA | ≤ 25 ns |
| Max. backup fuse with branch wiring | 40 A (gG / 1200 V DC) |
| Ambient conditions | |
| Degree of protection | IP20 (only when all terminal points are used) |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 6000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 50g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Standards/specifications | IEC 61643-31 |
| Note | 2018 |
| Standards/specifications | EN 61643-31 |
| Note | 2019 |
| Mounting type | DIN rail: 35 mm |