View larger
UM-D37SUB/M/HC3/DI24V/MR/SI/MT 2906944 PHOENIX CONTACT Active module
UM-D37SUB/M/HC3/DI24V/MR/SI/MT
2906944
PHOENIX CONTACT
1 Pcs.
Automation > Interface module
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A UM-D37SUB/M/HC3/DI24V/MR/SI/MT active module by Phoenix Contact integrates advanced signal conditioning and switching capabilities directly onto standard DIN rails. These active modules are commonly applied in industrial control loops where interface signals require precise monitoring and management. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Type of electrical connection, field-sided (EF005525): Screw connection
- Type of electrical connection, control sided (EF008549): D-Sub
- Number of poles (EF001391): 37
- Rated voltage (EF000228): 24 V
- Rated current (EF000227): 0.0065 A
- Depth (EF000049): 65.5 mm
- Width (EF000008): 343.5 mm
- Height (EF000040): 125.5 mm
- Mounting method (EF000003): DIN rail (top hat rail) 35 mm
More info
▲Key Commercial Data
| Orderkey | 2906944 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| GTIN | 4055626141442 |
| Weight per Piece (excluding packing) | 1,093.600 g |
| Custom tariff number | 85371098 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -15 °C ... 50 °C |
|---|---|
| Ambient temperature (storage/transport) | -15 °C ... 50 °C |
Input data
| Nominal input voltage UN | 24 V DC |
|---|---|
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Typical input current at UN | 6.5 mA |
| Typical response time | 5 ms |
| Typical release time | 7 ms |
| Protective circuit/component | Fuse |
| Damping diode | |
| Reverse polarity protection | |
| Status display/channel | Yellow LED |
Output data
| Contact type | 1 PDT |
|---|---|
| Contact material | Ag alloy, hard gold-plated |
| Maximum switching voltage | 36 V DC |
| Minimum switching voltage | 100 mV (12 V DC with damaged gold coating) |
| Limiting continuous current | 50 mA (500 mA with damaged gold coating) |
| Min. switching current | 1 mA (10 mA with damaged gold coating) |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
General
| No. of channels | 16 |
|---|---|
| Operating mode | 100% operating factor |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
Connection data for connection 1
| Connection name | Controller level |
|---|---|
| Connection method | D-SUB pin strip |
| Number of connections | 1 |
| Number of positions | 37 |
Connection data for connection 2
| Connection name | Controller level |
|---|---|
| Connection method | IDC/FLK pin strip |
| Number of connections | 1 |
| Number of positions | 50 |
| Pitch | 2.54 mm |
Connection data for connection 3
| Connection name | Field level |
|---|---|
| Connection method | Screw connection with disconnect knife |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Supported controller
| Corresponding control | HONEYWELL Experion PKS C300/C-Series |
|---|---|
| Corresponding I/O card | TDIL01 (non-redundant) |
| TDIL11 (redundant) |
Standards and Regulations
| Standards/regulations | DIN EN 50178 |
|---|---|
| Rated surge voltage | 0.6 kV |
| Degree of pollution | 2 |
| Overvoltage category | II |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |