View larger
UM- D37SUB/M/HC3/16DO/MR/MT 2900068 PHOENIX CONTACT Active module
UM-D37SUB/M/HC3/16DO/MR/MT
2900068
PHOENIX CONTACT
1 Pcs.
Automation > Interface module
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact UM- D37SUB/M/HC3/16DO/MR/MT active module delivers enhanced switching functionality and logic adaptation within modern industrial control installations. Active modules interface controller outputs directly to field instrumentation while providing internal circuit protection.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Orderkey: 2900068
- Packing unit: 1 pc
- Note: Made to Order (non-returnable)
- GTIN: 4046356363518
- Weight per Piece (excluding packing): 798.000 g
- Custom tariff number: 85369010
- Country of origin: DE (Germany)
- Utilization restriction: EMC: class A product, see manufacturer's declaration in the download area
- Width: 259 mm
- Height: 126 mm
- Depth: 66 mm
- Ambient temperature (operation): -15 °C ... 50 °C
- Ambient temperature (storage/transport): -15 °C ... 50 °C
- Nominal input voltage U N: 24 V DC
- Input voltage range in reference to U N: 0.85 ... 1.1
- Typical input current at U N: 9 mA
More info
▲Key Commercial Data
| Orderkey | 2900068 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| GTIN | 4046356363518 |
| Weight per Piece (excluding packing) | 798.000 g |
| Custom tariff number | 85369010 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -15 °C ... 50 °C |
|---|---|
| Ambient temperature (storage/transport) | -15 °C ... 50 °C |
Input data
| Nominal input voltage UN | 24 V DC |
|---|---|
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Typical input current at UN | 9 mA |
| Typical response time | 5 ms |
| Typical release time | 7 ms |
| Protective circuit/component | Damping diode |
| Status display/channel | Yellow LED |
Output data
| Contact type | 1 PDT |
|---|---|
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 12 V AC/DC |
| Limiting continuous current | 4 A (see derating curve) |
| Min. switching current | 10 mA |
| Interrupting rating (ohmic load) max. | 96 W (at 24 V DC) |
| 20 W (at 48 V DC) | |
| 18 W (at 60 V DC) | |
| 23 W (at 110 V DC) | |
| 40 W (at 220 V DC) | |
| 1000 VA (for 250 V AC) |
General
| No. of channels | 16 |
|---|---|
| Mechanical service life | 2x 107cycles |
| Operating mode | 100% operating factor |
| Degree of protection | IP00 |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
Connection data for connection 1
| Connection name | Controller level |
|---|---|
| Connection method | D-SUB pin strip |
| Number of connections | 1 |
| Number of positions | 37 |
Connection data for connection 2
| Connection name | Field level |
|---|---|
| Connection method | Screw connection with disconnect knife |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Connection data for connection 3
| Connection name | Control side |
|---|---|
| Connection method | Flat-ribbon cable connector in acc. with IEC 60603-13 |
| Number of connections | 1 |
| Number of positions | 50 |
Supported controller
| Corresponding control | HONEYWELL Experion PKS C300/C-Series |
|---|---|
| Corresponding I/O card | TDOB01 (non-redundant) |
| TDOB11 (redundant) |
Standards and Regulations
| Designation | Air clearances and creepage distances, input/output |
|---|---|
| Standards/regulations | DIN EN 50178: 1998-04 |
| Rated insulation voltage | 260 V |
| Rated surge voltage | 6 kV (1.2/50 μs) |
| Insulation | Reinforced insulation |
| Degree of pollution | 2 |
| Overvoltage category | III |
| Designation | Air and creepage distances, output/output |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Rated insulation voltage | 260 V |
| Rated surge voltage | 4 kV (1.2/50 μs) |
| Insulation | Basic insulation |
| Degree of pollution | 2 |
| Overvoltage category | III |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |