View larger
BT-1S-230AC/A 2803409 PHOENIX CONTACT Type 3 surge protection device
BT-1S-230AC/A
2803409
PHOENIX CONTACT
1 Pcs.
Automation > Surge protection device for terminal equipment
Trabtech (TT)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact part number BT-1S-230AC/A (model BT-1S-230AC/A 2803409 PHOENIX CONTACT Type 3 surge protection device) is a Type 3 surge protection device engineered to defend terminal equipment against residual overvoltages in low-voltage distribution grids. Devices of this class are typically installed downstream of main protection stages close to sensitive loads.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Device protection
- Product family: BLOCKTRAB
- IEC power supply system: TN-S
- Type: Installation module
- Distance between live and grounded parts: 3 mm
- Number of positions: 2
- Surge protection fault message: Acoustic
- Data management status Article revision: 08
- Insulation characteristics Overvoltage category: III
- Pollution degree: 2
- IEC test classification: III
- EN type: T3
- Number of ports: One
- Connection method: Spring-cage connection
- Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
More info
▲| Product type | Device protection |
| Product family | BLOCKTRAB |
| IEC power supply system | TN-S |
| TT | |
| IT with N conductor | |
| Type | Installation module |
| Distance between live and grounded parts | 3 mm |
| Number of positions | 2 |
| Surge protection fault message | Acoustic |
| Data management status | |
| Article revision | 08 |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| IEC test classification | III |
| T3 | |
| EN type | T3 |
| Number of ports | One |
| Distance between live and grounded parts | 3 mm |
| Connection method | Spring-cage connection |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Dimensional drawing | |
| Width | 22.5 mm |
| Height | 43 mm |
| Depth | 26.2 mm |
| Color | black (RAL 9005) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6 |
| Housing material | PA 6.6 |
| Mode of protection | L-N |
| L-PE | |
| N-PE | |
| Direction of action | L(N)-PE |
| Nominal voltage UN | 230/400 V AC (TN-S) |
| 230/400 V AC (TT - only in use with RCD) | |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous operating voltage UC(L-N) | 275 V AC |
| Maximum continuous operating voltage UC(L-PE) | 440 V AC |
| Maximum continuous operating voltage UC(N-PE) | 440 V AC |
| Rated load current IL | 16 A (30 °C) |
| Residual current IPE | ≤ 3 µA |
| Standby power consumption PC | ≤ 400 mVA |
| Reference test voltage UREF | 255 V AC |
| Nominal discharge current In(8/20) µs | 3 kA |
| Maximum discharge current Imax(8/20) µs | 8 kA |
| Combination wave UOC | 6 kV |
| Voltage protection level Up(L-N) | ≤ 1.3 kV |
| Voltage protection level Up(L-PE) | ≤ 1.5 kV |
| Voltage protection level Up(N-PE) | ≤ 1.5 kV |
| Residual voltage at Iamax, (L-N) | ≤ 1.3 kV (at UOC) |
| Residual voltage at Iamax, (L-PE) | ≤ 1.5 kV (at UOC) |
| Residual voltage at Iamax, (PE) | ≤ 1.5 kV (at UOC) |
| TOV behavior at UT(L-N) | 335 V AC (5 s / withstand mode) |
| 440 V AC (120 min / safe failure mode) | |
| TOV behavior at UT(L-PE) | 440 V AC (5 s / withstand mode) |
| 440 V AC (120 min / withstand mode) | |
| 1455 V AC (200 ms / safe failure mode) | |
| TOV behavior at UT(N-PE) | 1200 V AC (200 ms / safe failure mode) |
| Response time tA(L-N) | ≤ 25 ns |
| Response time tA(L-PE) | ≤ 100 ns |
| Short-circuit current rating ISCCR | 1 kA AC |
| Max. backup fuse with branch wiring | 16 A (MCB B) |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -30 °C ... 75 °C |
| Ambient temperature (storage/transport) | -30 °C ... 75 °C |
| Altitude | ≤ 2000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Air clearances and creepage distances | |
| Standards/regulations | EN 60664-1 / IEC 60664-1 / IEC 61643-1 / EN 61643-11 |
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
| Mounting type | Screw mounting |