View larger
TTC-6P-T3-24DC-UT-I 1027584 PHOENIX CONTACT Type 3 surge protection device
TTC-6P-T3-24DC-UT-I
1027584
PHOENIX CONTACT
1 Pcs.
Automation > Surge protection device for terminal equipment
Trabtech (TT)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact builds the TTC-6P-T3-24DC-UT-I type 3 surge protection device to safeguard low-voltage control circuits and sensors from transient voltage spikes. These slim terminal blocks mount on standard DIN rails to maximize cabinet space while maintaining high protection standards.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Max. continuous voltage AC (EF004198): 30 V
- Mounting method (EF000003): DIN rail (top hat rail) 35 mm
- With remote signalling contact (EF000422): No
- Signalling at the device (EF004241): Optic
- Category type 3 (EF004231): Yes
- Degree of protection (IP) (EF005474): IP20
More info
▲Key Commercial Data
| Orderkey | 1027584 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| GTIN | 4055626522227 |
| Weight per Piece (excluding packing) | 37.400 g |
| Custom tariff number | 85363030 |
| Country of origin | DE (Germany) |
Ambient conditions
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 6000 m (amsl (above mean sea level)) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z) |
General
| EN type | T3 |
|---|---|
| IEC power supply system | DC |
| Number of ports | One |
| Mode of protection | (DC+) - (DC-) |
| (DC+/DC-) - PE | |
| Mounting type | DIN rail: TH 35 - 7.5 mm |
| Color | traffic grey A RAL 7042 |
| light gray RAL 7035 | |
| Housing material | PBT |
| Degree of pollution | 2 |
| Flammability rating according to UL 94 | V-0 |
| Type | DIN rail module, two-section, divisible |
| Number of positions | 2 |
| Surge protection fault message | optical |
Additional descriptions
| Note | CBM: |
|---|---|
| 2905743 CBM E4 24DC/0.5-10A NO-R | |
| 2905744 CBM E8 24DC/0.5-10A NO-R | |
| CBMC: | |
| 2906032 CBMC E4 24DC/1-10A NO | |
| 2908716 CBMC E4 24DC/1-10A NO-C | |
| 2910411 CBMC E4 24DC/1-10A IOL | |
| PTCB: | |
| 2908262 PTCB E1 24DC/1-8A NO |
Protective circuit
| Nominal voltage UN | 24 V DC |
|---|---|
| Maximum continuous voltage UC | 30 V DC |
| Rated load current IL | 6 A (30 °C) |
| Residual current IPE | ≤ 5 µA |
| Nominal discharge current In(8/20) µs | 1 kA |
| Combination wave UOC | 2 kV (2 Ω) |
| 6 kV (12 Ω) | |
| Voltage protection level Up(DC+) - (DC-) | ≤ 0.09 kV (Uoc= 2 kV) |
| ≤ 0.2 kV (Uoc= 6 kV) | |
| Voltage protection level Up(DC+/DC-) - PE | ≤ 0.7 kV |
| ≤ 1 ns | |
| ≤ 100 ns | |
| Short-circuit current rating ISCCR | 60 A DC (without additional backup fuse) |
| 220 A DC | |
| Max. backup fuse with branch wiring | 6 A (gG) |
| 10 A (see the note: CBM, CBMC, PTCB, CB E1) | |
| Maximum backup fuse for through wiring | 6 A (gG) |
Connection data
| Connection method | Screw connection |
|---|---|
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Stripping length | 8 mm |