PHOENIX CONTACT TTC-6P-T3-24DC-PT-I TTC-6P-T3-24DC-PT-I 1027586 PHOENIX CONTACT Type 3 surge protection device View larger
Images are for illustrative purposes only. Please refer to data sheet for details

TTC-6P-T3-24DC-PT-I 1027586 PHOENIX CONTACT Type 3 surge protection device

TTC-6P-T3-24DC-PT-I

1027586

PHOENIX CONTACT

1 Pcs.

Type 3 surge protection device Type 3 surge protection, consisting of plug-in protection and base element, with integrated status indicator for 24VDC power supplies

Automation > Surge protection device for terminal equipment
Trabtech (TT)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact manufactures the TTC-6P-T3-24DC-PT-I Type 3 surge protection device, designed to safeguard sensitive electronic equipment from transient overvoltages. These protective components are commonly installed in control cabinets and distribution boards to limit residual surges right at terminal devices. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Max. continuous voltage AC (EF004198): 30 V
  • Mounting method (EF000003): DIN rail (top hat rail) 35 mm
  • With remote signalling contact (EF000422): No
  • Signalling at the device (EF004241): Optic
  • Category type 3 (EF004231): Yes
  • Degree of protection (IP) (EF005474): IP20

More info

▲

Key Commercial Data

Orderkey1027586
Packing unit1 pc
GTIN4055626522333
Weight per Piece (excluding packing)32.620 g
Custom tariff number85363030
Country of originDE (Germany)

Dimensions

Height105.8 mm
Width6.2 mm +0.1 mm
Depth100 mm (incl. DIN rail 7.5 mm)

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 6000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z)

General

EN typeT3
IEC power supply systemDC
Number of portsOne
Mode of protection(DC+) - (DC-)
(DC+/DC-) - PE
Mounting typeDIN rail: TH 35 - 7.5 mm
Colortraffic grey A RAL 7042
light gray RAL 7035
Housing materialPBT
Degree of pollution2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Number of positions2
Surge protection fault messageoptical

Additional descriptions

NoteCBM:
2905743 CBM E4 24DC/0.5-10A NO-R
2905744 CBM E8 24DC/0.5-10A NO-R
CBMC:
2906032 CBMC E4 24DC/1-10A NO
2908716 CBMC E4 24DC/1-10A NO-C
2910411 CBMC E4 24DC/1-10A IOL
PTCB:
2908262 PTCB E1 24DC/1-8A NO
CB E1:
2800907 CB E1 24DC/10A NO P
2800914 CB E1 24DC/10A S-R P
2800928 CB E1 24DC/10A S-C P
2905805 CB E1 24DC/10A SI-R P
2905812 CB E1 24DC/10A SI-C P

Protective circuit

Nominal voltage UN24 V DC
Maximum continuous voltage UC30 V DC
Rated load current IL6 A (30 °C)
Residual current IPE≤ 5 µA
Nominal discharge current In(8/20) µs1 kA
Combination wave UOC2 kV (2 Ω)
6 kV (12 Ω)
Voltage protection level Up(DC+) - (DC-)≤ 0.09 kV (Uoc= 2 kV)
≤ 0.2 kV (Uoc= 6 kV)
Voltage protection level Up(DC+/DC-) - PE≤ 0.7 kV
≤ 1 ns
≤ 100 ns
Short-circuit current rating ISCCR60 A DC (without additional backup fuse)
220 A DC
Max. backup fuse with branch wiring6 A (gG)
10 A (see the note: CBM, CBMC, PTCB, CB E1)
Maximum backup fuse for through wiring6 A (gG)

Connection data

Connection methodPush-in connection
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section solid0.2 mm² ... 4 mm²
Conductor cross section AWG24 ... 12
Stripping length8 mm

Standards and Regulations

Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012

Environmental Product Compliance

REACh SVHCLead 7439-92-1

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.