View larger
DFLK-D25 SUB/M/FKCT 2903055 PHOENIX CONTACT Interface module
DFLK-D25 SUB/M/FKCT
2903055
PHOENIX CONTACT
1 Pcs.
Automation > Interface module
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact DFLK-D25 SUB/M/FKCT is an interface module that provides secure signal adaptation between heavy-duty multi-pin connectors and standard field wiring. These units are deployed extensively in electrical engineering to streamline complex cabinet cabling and maintenance procedures. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Interface module
- Product family: VARIOFACE
- Number of positions: 25
- Data management status Article revision: 06
- Overvoltage category: II
- Pollution degree: 2
- Operating voltage (AC): ≤ 30 V AC
- Operating voltage (DC): ≤ 60 V DC
- Current (per branch): ≤ 2.5 A
- Current (Total current): ≤ 50 A (50 °C)
- Rated surge voltage: 1.2 kV (1.2/50 μs)
- Connection method: D-SUB pin strip
- Screw thread: UNC 4-40
- Number of connections: 1
- Insertion/withdrawal cycles: > 500
More info
▲| Product type | Interface module |
| Product family | VARIOFACE |
| Number of positions | 25 |
| Data management status | |
| Article revision | 06 |
| Insulation characteristics: Air clearances and creepage distances | |
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Current (per branch) | ≤ 2.5 A |
| Current (Total current) | ≤ 50 A (50 °C) |
| Air clearances and creepage distances | |
| Rated insulation voltage | 125 V |
| Rated surge voltage | 1.2 kV (1.2/50 μs) |
| Connection 1 (control level) | |
| Connection in acc. with standard | IEC 60807-2 |
| Connection method | D-SUB pin strip |
| Screw thread | UNC 4-40 |
| Number of connections | 1 |
| Number of positions | 25 |
| Insertion/withdrawal cycles | > 500 |
| Pitch | 2.77 mm |
| Connection 2 (field level) | |
| Connection method | Push-in spring connection |
| Stripping length | 10 mm |
| Number of positions | 26 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| 0.25 mm² ... 2.5 mm² (Ferrule without plastic sleeve) | |
| 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) | |
| Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) |
| Conductor cross section AWG | 24 ... 12 |
| Pitch | 5 mm |
| Status display present | No |
| Item dimensions | |
| Width | 38 mm |
| Height | 83.4 mm |
| Depth | 46 mm |
| Color | gray (RAL 7042) |
| Housing insulation material | Polyamide PA non-reinforced |
| Ambient conditions | |
| Degree of protection (Module) | IP20 |
| Degree of protection (Installation location) | ≥ IP54 |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
| UKCA | |
| Certificate | UKCA-compliant |
| Air clearances and creepage distances | |
| Standards/regulations | EN IEC 60664-1 |
| Mounting type | Rear mounting |
| Mounting position | any |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |