View larger
HC-D 40-A-TWIN-PEL-M 1580150 PHOENIX CONTACT Terminal adapter
HC-D 40-A-TWIN-PEL-M
1580150
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact terminal adapter (part number HC-D 40-A-TWIN-PEL-M) acts as a specialized interface bracket designed to transition modular connection profiles inside control cabinet infrastructures. It provides structured wire termination support for industrial automation panels requiring organized cable routing near mounting bases.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B16 type
- General: Connectors may be operated only when there is no load/voltage.
- Product type: Terminal adapter
- Product family: HC-D
- Series: HC-D
- Type: B16
- Number of positions: 40
- Connection profile: 40+PE
- Type: for the left side of the control cabinet
- Data management status Article revision: 09
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Rated voltage (III/3): 250 V
- Rated surge voltage: 4 kV
- Rated current: 10 A
- SCCR: 5 kA (UL 2237)
More info
▲| General | For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B16 type |
| General | Connectors may be operated only when there is no load/voltage. |
| Product type | Terminal adapter |
| Product family | HC-D |
| Series | HC-D |
| Type | B16 |
| Number of positions | 40 |
| Connection profile | 40+PE |
| Type | for the left side of the control cabinet |
| Data management status | |
| Article revision | 09 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated voltage (III/3) | 250 V |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| SCCR | 5 kA (UL 2237) |
| Connection technology | |
| Connection technology | Push-in connection |
| Conductor connection | |
| Conductor cross section | 0.5 mm² ... 2.5 mm² |
| Connection cross section AWG | 22 ... 12 |
| Stripping length of the individual wire | 10 mm |
| Dimensional drawing | |
| Width | 34 mm |
| Height | 139.3 mm |
| Length | 83 mm |
| Drill hole distance, horizontal | 77.5 mm |
| Drill hole distance, vertical | 27 mm |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Stripping length of the individual wire | 10 mm |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Tests | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Testing | |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Not for HC-EVO panel mounting bases |