PHOENIX CONTACT HC-B 6-A-DT-PEL-M HC-B 6-A-DT-PEL-M 1648364 PHOENIX CONTACT Terminal adapter View larger
Images are for illustrative purposes only. Please refer to data sheet for details

HC-B 6-A-DT-PEL-M 1648364 PHOENIX CONTACT Terminal adapter

HC-B 6-A-DT-PEL-M

1648364

PHOENIX CONTACT

5 Pcs.

Terminal adapter HEAVYCON terminal block adapter with plug insert, B6 series, 6 poles, for the left side of the control cabinet, push-in connection

Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact terminal adapter (HC-B 6-A-DT-PEL-M, part number 1648364) provides structured conductor termination for B6 heavy-duty connector configurations. Terminal adapters streamline control panel wiring by bridging internal cables to robust pluggable interfaces.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Contact type (EF001587): Pin
  • Number of poles (EF001391): 6
  • Ambient temperature (EF002386): 125 °C
  • Operating temperature (EF002393): -40 °C
  • Rated voltage (EF000228): 500 V
  • Over voltage category (EF006785): III
  • With wire protection (EF000550): No
  • Connectable conductor cross section multi-wired (EF007343): 0.5 mm²
  • With protective conductor (EF007468): Yes
  • Width (EF000008): 34 mm
  • Height (EF000040): 70.5 mm
  • Depth (EF000049): 50.5 mm

More info

▲

Key Commercial Data

Orderkey1648364
Packing unit5 pc
Catalog pagePage 543 (C-2-2017)
GTIN4046356092081
Weight per Piece (excluding packing)72.380 g
Custom tariff number85366990
Country of originCN (China)

Dimensions

Drill hole distance, horizontal44 mm
Height70.5 mm

Ambient conditions

Degree of protection (IP)IP20
Ambient temperature (operation)-40 °C ... 125 °C

Electrical characteristics

Number of positions6
Rated voltage (III/3)500 V
Rated surge voltage6 kV
Rated current16 A

Mechanical characteristics

TypeB6
Connection methodPush-in connection
Stripping length of the individual wire10 mm (13 mm if ferrules are used)
Conductor cross section0.5 mm² ... 2.5 mm²
Connection cross section AWG22 ... 12

General

NoteFor HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B6 type
Connectors may be operated only when there is no load/voltage.
Contact materialCopper alloy
Contact surface materialAg
Contact carrier materialPA
Standards/regulationsPA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Degree of pollution3
Overvoltage categoryIII
Flammability rating according to UL 94V0
Assembly instructionsTo ensure correct use, installation in housing with IP54 protection or better is required
Installation instructions1) Use ferrules. 0.5 mm² ... 2.5 mm² with insulating collar, length: 10 mm, stripping length: 13 mm, 2) screwdriver SZF0-0,4x2,5 (similar to DIN 5264)

Standards and Regulations

Connection in acc. with standardCSA
Constructional and testing regulationsDIN EN 61984
DIN EN 60664
IEC 60352
Flammability rating according to UL 94V0

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.