View larger
HC-B 24-A-UT-PER-M 1648108 PHOENIX CONTACT Terminal adapter
HC-B 24-A-UT-PER-M
1648108
PHOENIX CONTACT
5 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact HC-B 24-A-UT-PER-M terminal adapter facilitates straightforward conductor routing and termination within heavy-duty connector configurations. These adapters are routinely deployed in control cabinets and machinery to organize multi-wire power and signal feeds.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type
- General: Connectors may be operated only when there is no load/voltage.
- Product type: Terminal adapter
- Product family: HC-B
- Series: HC-B
- Type: B24
- Number of positions: 24
- Connection profile: 24+PE
- Contact numbering: 1 - 24
- Type: for the right side of the control cabinet
- Screwdriver blade: 0.5 x 3.5 mm
- Data management status Article revision: 08
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Rated voltage (III/3): 500 V
- Rated surge voltage: 6 kV
More info
▲| General | For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type |
| General | Connectors may be operated only when there is no load/voltage. |
| Product type | Terminal adapter |
| Product family | HC-B |
| Series | HC-B |
| Type | B24 |
| Number of positions | 24 |
| Connection profile | 24+PE |
| Contact numbering | 1 - 24 |
| Type | for the right side of the control cabinet |
| Screwdriver blade | 0.5 x 3.5 mm |
| Data management status | |
| Article revision | 08 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
| SCCR | 5 kA (UL 2237) |
| Connection technology | |
| Connection technology | Screw connection |
| Connection in acc. with standard | IEC / EN |
| Conductor connection | |
| Conductor cross section | 0.5 mm² ... 2.5 mm² |
| Connection cross section AWG | 20 ... 14 |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| Stripping length of the individual wire | 12 mm |
| Dimensional drawing | |
| Width | 34 mm |
| Height | 71.6 mm |
| Length | 111 mm |
| Drill hole distance, horizontal | 104 mm |
| Drill hole distance, vertical | 27 mm |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Stripping length of the individual wire | 12 mm |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Tests | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Testing | |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Connectors may only be actuated when there is no load/voltage. |