View larger
TDPT 2,5/ 2-SP-5,08 GY7035 1128242 PHOENIX CONTACT Terminal for printed circuit board, pitch: 5,08 mm, numbe..
TDPT 2,5/ 2-SP-5,08 GY7035
1128242
PHOENIX CONTACT
50 Pcs.
Connectors > Printed circuit board terminal
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Providing high-current capacity for demanding circuit designs, this Phoenix Contact terminal for printed circuit board, part number TDPT 2,5/ 2-SP-5,08 GY7035 1128242, ensures secure electrical transitions. These blocks are commonly integrated into power electronics and heavy-duty controller modules.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product Type: Printed Circuit Board Terminal
- Product Family: TDPT 2.5/.. -SP
- Product Line: COMBICON Terminals M
- Number of poles: 2
- Step: 5.08 mm
- Number of rows: 1
- Pin Design: Linear Pin Arrangement
- Number of Solder Pins Per Potential: 2
- Data Maintenance Status Article Review: 00
- Nominal Current I N: 32 A
- Nominal voltage U N: 400 V
- Sizing voltage (III/3): 320 V
- Dimensioning transient voltage (III/3): 4 kV
- Dimensioning voltage (III/2): 400 V
- Dimensioning Transient Voltage (III/2): 4 kV
- Nominal voltage (II/2): 630 V
More info
▲| Product Type | Printed Circuit Board Terminal |
| Product Family | TDPT 2.5/.. -SP |
| Product Line | COMBICON Terminals M |
| Number of poles | 2 |
| Step | 5.08 mm |
| Number of rows | 1 |
| Pin Design | Linear Pin Arrangement |
| Number of Solder Pins Per Potential | 2 |
| Data Maintenance Status | |
| Article Review | 00 |
| Nominal Current IN | 32 A |
| Nominal voltage UN | 400 V |
| Sizing voltage (III/3) | 320 V |
| Dimensioning transient voltage (III/3) | 4 kV |
| Dimensioning voltage (III/2) | 400 V |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Nominal voltage (II/2) | 630 V |
| Dimensioning transient voltage (II/2) | 4 kV |
| Connection technology | |
| Nominal Section | 2.5 mm² |
| Connecting Conductors | |
| Connection type | Push-in spring connection |
| Rigid conductor section | 0.2 mm² ... 4 mm² (Conductor connection with open terminal point) |
| 0.75 mm² ... 4 mm² (Push-in connection) | |
| Flexible conductor section | 0.2 mm² ... 4 mm² |
| AWG Conductor Section | 24 ... 12 |
| Flexible conductor section with toe cap, without plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Flexible conductor section with toe cap, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
| 2 conductors with the same cross-section, flexible with TWIN toe cap with plastic sleeve | 0.5 mm² ... 0.75 mm² |
| Peel Length | 10 mm |
| Type of mounting | Wave soldering |
| Pin Design | Linear Pin Arrangement |
| Material data - contact | |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu Alloy |
| Surface Characteristics | Galvanically tinned |
| Metal surface of the terminal point (top layer) | Tin (10 - 16 μm Sn) |
| Metal surface weld area (top layer) | Tin (10 - 16 μm Sn) |
| Material data - housing | |
| Color (Housing) | Light Grey (7035) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability class according to UL 94 | V0 |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Material data: drive element | |
| Color (Drive Element) | Orange (2003) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability class according to UL 94 | V0 |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Dimension Scheme | |
| Step | 5.08 mm |
| Width [w] | 10.96 mm |
| Height [h] | 22.5 mm |
| Length [l] | 18 mm |
| Overall Height | 19 mm |
| Weld Pin Length [P] | 3.5 mm |
| Temple Dimensions | 0.8 x 0.8 mm |
| Printed circuit board design | |
| Spacing between rods | 8.7 mm |
| Hole diameter | 1.4 mm |
| Checking for damage to conductors and loosening | |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Result | Approved Test |
| Tensile Test | |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
| 0.2 mm² / flexible / > 10 N | |
| 4 mm² / rigid / > 60 N | |
| 4 mm² / flexible / > 60 N | |
| Heating Verification | |
| Test Specification | DIN EN 60947-7-4 (VDE 0611-7-4):2014-08 |
| Heating test requirement | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
| Short-term permissible current | |
| Test Specification | DIN EN 60947-7-4 (VDE 0611-7-4):2014-08 |
| Insulation resistance | |
| Test Specification | DIN EN 60512-3-1:2003-01 |
| Creepage Lines & Air Isolation Distances | |
| Test Specification | DIN EN 60947-1 (VDE 0660-100):2015-09 |
| Insulating material group | I |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Sizing Insulation Voltage (III/3) | 320 V |
| Nominal transient voltage (III/3) | 4 kV |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Minimum creepage line value (III/3) | 4 mm |
| Sizing Insulation Voltage (III/2) | 400 V |
| Nominal transient voltage (III/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| Minimum creepage line value (III/2) | 3 mm |
| Sizing Insulation Voltage (II/2) | 630 V |
| Nominal transient voltage (II/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum creepage line value (II/2) | 3.2 mm |
| Vibration test | |
| Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
| frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Test duration per axis | 2.5 h |
| Test Directions | X, Y, and Z axes |
| Essay filam. incandescent | |
| Test Specification | DIN EN 60695-2-10 (VDE 0471-2-10):2014-04 |
| Temperature | 850 °C |
| Performance Time | 5 s |
| Aging | |
| Test Specification | DIN EN 60947-7-4 (VDE 0611-7-4):2014-08 |
| Environmental conditions | |
| Ambient Temperature (Service) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ambient Temperature (Mounting) | -5°C ... 105 °C |
| Type of packaging | Boxed Packaging |