PHOENIX CONTACT TC-XC96-DO32-EX-HIMAX01 TC-XC96-DO32-EX-HIMAX01 2908752 PHOENIX CONTACT Termination Carrier for connecting 32 MACX Analog Ex i solen.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

TC-XC96-DO32-EX-HIMAX01 2908752 PHOENIX CONTACT Termination Carrier for connecting 32 MACX Analog Ex i solen..

TC-XC96-DO32-EX-HIMAX01

2908752

PHOENIX CONTACT

1 Pcs.

Termination Carrier for connecting 32 MACX Analog Ex i solenoid drivers to digital output cards of the HIMA HIMax controller, via one C96 connector, 96-pos. Suitable for the HIMax X-DO 32 01 card, without a redundant feed-in option Termination Carrier for the connection of 32 MACX Analog Ex-i valve control blocks to digital output cards of the HIMA-HIMax control system, via a 96-pole C96 connector. Suitable for HIMax X-DO 32 01 card, no redundant power supply possible

Automation > Interface module
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact TC-XC96-DO32-EX-HIMAX01 is a specialized termination carrier engineered to facilitate seamless connection between safety controllers and intrinsically safe analog I/O cards. Termination carriers organize complex multi-channel signal paths in hazardous process automation areas while maintaining galvanic isolation and system integrity. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
  • Product type: Module carrier
  • Data management status Article revision: 04
  • Overvoltage category: II
  • Pollution degree: 2
  • Max. permissible current: 0.5 A (Signal/channel)
  • Nominal voltage U N: < 50 V DC (Per signal/channel)
  • Rated surge voltage: 0.5 kV
  • Supported controller HIMA HIMax Suitable I/O card: X-DO 32 01
  • Number of connections: 1
  • Controller level Connection in acc. with standard: IEC 60603-2
  • Connection method: Pin strip
  • Type: C
  • Number of connections: 1
  • Number of positions: 96
  • Width: 448 mm

More info

▲
Technical data

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Utilization restriction
EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties
Product typeModule carrier
Data management status
Article revision04
Insulation characteristics: Air clearances and creepage distances
InsulationFunctional insulation
Overvoltage categoryII
Pollution degree2

Electrical properties
Max. permissible current0.5 A (Signal/channel)
Nominal voltage UN< 50 V DC (Per signal/channel)
Air clearances and creepage distances
Rated insulation voltage30 V
Rated surge voltage0.5 kV
Supported controller HIMA HIMax
Suitable I/O cardX-DO 32 01

Connection data
Number of connections1
Controller level
Connection in acc. with standardIEC 60603-2
Connection methodPin strip
TypeC
Number of connections1
Number of positions96

Dimensions
Width448 mm
Height170 mm
Depth159.5 mm

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Shock15g, according to IEC 60068-2-27
Vibration (operation)2g, according to IEC 60068-2-6

Approvals
ATEX
Identification II 3 G Ex ec IIC T4 Gc X
UKCA Ex (UKEX)
Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIF21UKEX2908752X
UL, USA/Canada
IdentificationUL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC

Standards and regulations
Air clearances and creepage distances
Standards/regulationsEN 60664-1
Directive 2014/35/EU (EMV)
Standards/regulationsEN 6100-6-2
EN 6100-6-4
Directive 2014/34/EU (ATEX)
Standards/regulationsEN 60079-0
EN 60079-7
EN 60079-11

Mounting
Mounting typeDIN rail mounting
Assembly noteWith end bracket
Mounting positionvertical, horizontal

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.