View larger
TC-D37SUB-AIO16-MP-PS-UNI 2906640 PHOENIX CONTACT Module carrier
TC-D37SUB-AIO16-MP-PS-UNI
2906640
PHOENIX CONTACT
1 Pcs.
Automation > Interface module
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact TC-D37SUB-AIO16-MP-PS-UNI module carrier provides structured mounting and power distribution for control system signal channels in industrial panels. Module carriers organize multiple input and output channels to simplify complex wiring architectures within control enclosures. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Module carrier
- Data management status Article revision: 03
- Overvoltage category: II
- Pollution degree: 2
- Max. permissible current: 23 mA (Signal/channel)
- Nominal voltage U N: < 30 V DC (Per signal/channel)
- Rated surge voltage: 0.5 kV
- Supply Designation: Power module
- Fuse: 2x 2.5 A on PCB, slow-blow (replaceable)
- Input voltage: 24 V DC
- Input voltage range: 19.2 V DC ... 30 V DC
- Input current: ≤ 2 A
- Redundant supply: yes, decoupled from diodes
- Polarization and surge protection: Yes
- Output name: Switching output
- Contact switching type: 1 N/C contact (alarm = open)
More info
▲| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Product type | Module carrier |
| Data management status | |
| Article revision | 03 |
| Insulation characteristics: Air clearances and creepage distances | |
| Insulation | Basic insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
| Max. permissible current | 23 mA (Signal/channel) |
| Nominal voltage UN | < 30 V DC (Per signal/channel) |
| Air clearances and creepage distances | |
| Rated insulation voltage | 50 V |
| Rated surge voltage | 0.5 kV |
| Supply | |
| Designation | Power module |
| Note | Power supply via 2902067 MINI MCR-2-PTB-PT power terminal and 2904508 MINI MCR-2-FM-RC-PT fault signaling module |
| Fuse | 2x 2.5 A on PCB, slow-blow (replaceable) |
| Input voltage | 24 V DC |
| Input voltage range | 19.2 V DC ... 30 V DC |
| Input current | ≤ 2 A |
| Redundant supply | yes, decoupled from diodes |
| Polarization and surge protection | Yes |
| Output name | Switching output |
| Contact switching type | 1 N/C contact (alarm = open) |
| Maximum switching voltage | 30 V DC (50 mA) |
| Power supply | |
| Connection method | Screw connection |
| Stripping length | 7 mm |
| Number of connections | 1 |
| Number of positions | 6 |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Controller level | |
| Connection method | D-SUB pin strip |
| Number of connections | 1 |
| Number of positions | 37 |
| X11 | |
| Connection method | IDC/FLK pin strip |
| Number of connections | 1 |
| Number of positions | 14 |
| Note | For connecting 16 HART devices to HART multiplexers |
| X12 | |
| Connection method | IDC/FLK pin strip |
| Number of connections | 1 |
| Number of positions | 14 |
| Note | For connecting a second TC-D37SUB-AIO16-MP-PS-UNI (additional 16 HART channels) |
| Status display | 2 x red LED (error) |
| 2x green LEDs (PWR1 and PWR2) |
| Width | 136 mm |
| Height | 170 mm |
| Depth | 159.5 mm |
| Flammability rating according to UL 94 | V0 |
| Ambient conditions | |
| Degree of protection | IP00 |
| Ambient temperature (operation) | -20 °C ... 60 °C (Please observe module specifications) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Shock | 15g, according to IEC 60068-2-27 |
| Vibration (operation) | 2g, according to IEC 60068-2-6 |
| UL, USA/Canada | |
| Identification | UL 61010 Listed |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| Class I, Zone 2, Group IIC | |
| Air clearances and creepage distances | |
| Standards/regulations | EN IEC 60664-1 |
| Mounting type | DIN rail mounting |
| Assembly note | No end clamp |
| Mounting position | vertical, horizontal |