View larger
ST-REL7-HG220/4X21 2892465 PHOENIX CONTACT Relay connectors
ST-REL7-HG220/4X21
2892465
PHOENIX CONTACT
5 Pcs.
Automation > Switching relay
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact ST-REL7-HG220/4X21 is a relay connector engineered for complex switching tasks within automated industrial machinery and process control systems. Such assemblies provide multi-pole signal routing and galvanic isolation between field devices and central processing units, enhancing overall system safety and performance. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Complete with socket (EF003359): No
- With detachable clamps (EF003340): Yes
- With LED indication (EF005950): Yes
- Rated control supply voltage DC (EF003980): 176 V
- Voltage type for actuating (EF008242): DC
- Drive, polarization (EF003355): Polarized
- Drive, switching attitude (EF003356): Mono stable
- Number of contacts as normally closed contact (EF008255): 0
- Number of contacts as normally open contact (EF008256): 0
- Number of contacts as change-over contact (EF008257): 4
- Type of switch contact (EF003358): Single contact
- With forced-guided contacts (EF003357): No
- Material of contact surface (EF004020): Gold
- Nominal current (EF000001): 0.006 A
- Width (EF000008): 45.6 mm
- Height (EF000040): 33 mm
More info
▲Key Commercial Data
| Orderkey | 2892465 |
|---|---|
| Packing unit | 5 pc |
| Catalog page | Page 87 (IF-2002) |
| GTIN | 4017918078713 |
| Weight per Piece (excluding packing) | 100.910 g |
| Custom tariff number | 85364900 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Coil side
| Nominal input voltage UN | 220 V DC |
|---|---|
| Input voltage range in reference to UN | 0.8 ... 1.1 |
| Typical input current at UN | 6 mA |
| Typical response time | 15 ms (with DC) |
| Typical release time | 15 ms (with DC) |
| Protective circuit | Damping diode, polarity protection Damping diode, polarity protection diode |
| Operating voltage display | yes |
| Power dissipation for nominal condition | 1.32 W |
Contact side
| Contact type | Single contact, 4-PDT |
|---|---|
| Type of switch contact | Single contact |
| Contact material | AgCdO, hard gold-plated |
| Maximum switching voltage | 250 V AC/DC |
| Maximum inrush current | 6 A |
| Limiting continuous current | 6 A |
| Interrupting rating (ohmic load) max. | 120 W (at 24 V DC) |
| 180 W (at 48 V DC) | |
| 105 W (at 60 V DC) | |
| 60 W (at 110 V DC) | |
| 90 W (at 220 V DC) | |
| 1250 VA (for 250 V AC) |
General
| Test voltage relay winding/relay contact | 2 kV AC (50 Hz, 1 min.) |
|---|---|
| Test voltage PDT/PDT | 2 kV AC (50 Hz, 1 min.) |
| Operating mode | 100% operating factor |
| Mechanical service life | approx. 107cycles |
| Net weight (SAP) | 100.91 g |
Standards and Regulations
| Standards/regulations | IEC 60664 |
|---|---|
| IEC 60664A | |
| DIN VDE 0110 | |
| DIN VDE 0109-11, draft | |
| DIN VDE 0160 (in relevant parts) | |
| Degree of pollution | 2 |
| Overvoltage category | II |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |