PHOENIX CONTACT ST-REL3-SG-B 24/21/M ST-REL3-SG-B 24/21/M 2898155 PHOENIX CONTACT Relay connectors View larger
Images are for illustrative purposes only. Please refer to data sheet for details

ST-REL3-SG-B 24/21/M 2898155 PHOENIX CONTACT Relay connectors

ST-REL3-SG-B 24/21/M

2898155

PHOENIX CONTACT

1 Pcs.

Relay connectors Relay connector, equipped with mini-residual switching relay, contacts (AgSnO): small to large powers, 1 inverter contact, 24 V DC input voltage, with free-flowing diode and polarity reversal protection diode, switch-to-negative Relay plug, fitted with remanence miniature switching relay, contacts (AgSnO): small to large loads, 1 changeover contact, input voltage 24 V DC, polarity protection and freewheeling diode, negative switching

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact ST-REL3-SG-B 24/21/M Relay connectors unit is engineered to provide secure plug-and-play signal switching within complex automation architectures. These modular relay connectors facilitate rapid installation and efficient maintenance inside industrial control systems.

Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Product type: Relay Module
  • Operating mode: 100% operating factor
  • Mechanical service life: approx. 10 7 cycles
  • Data management status Date of last data management: 02.05.2024
  • Article revision: 09
  • Overvoltage category: II
  • Pollution degree: 2
  • Maximum power dissipation for nominal condition: 0.19 W
  • Test voltage (Winding/contact): 2 kV rms (50 Hz, 1 min., winding/contact)
  • Rated surge voltage: 2.5 kV
  • Coil side Nominal input voltage U N: 24 V DC
  • Input voltage range: 19.2 V DC ... 26.4 V DC (20 °C)
  • Drive and function: bistable
  • Drive (polarity): polarized
  • Typical input current at U N: typ. 8 mA
  • Typical response time: 5 ms

More info

▲
Technical data

Product properties
Product typeRelay Module
Operating mode100% operating factor
Mechanical service lifeapprox. 107cycles
Data management status
Date of last data management02.05.2024
Article revision09
Insulation characteristics: Air clearances and creepage distances between the power circuits
InsulationBasic insulation
Overvoltage categoryII
Pollution degree2

Electrical properties
Maximum power dissipation for nominal condition0.19 W
Test voltage (Winding/contact)2 kVrms(50 Hz, 1 min., winding/contact)
Air clearances and creepage distances between the power circuits
Rated insulation voltage250 V AC
Rated surge voltage2.5 kV

Input data
Coil side
Nominal input voltage UN24 V DC
Input voltage range19.2 V DC ... 26.4 V DC (20 °C)
Drive and functionbistable
Drive (polarity)polarized
Typical input current at UNtyp. 8 mA
Typical response time5 ms
Typical release time5 ms
Pulse time range30 ms ... 5 s
Coil voltage24 V DC
Protective circuitFreewheeling diode; Freewheeling diode
Reverse polarity protection; Polarity protection diode

Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (At 5 V)
24 V (at 24 V)
Limiting continuous current6 A
Maximum inrush current8 A
Min. switching current1 mA (at 24 V)
100 mA (At 5 V)
Interrupting rating (ohmic load) max.144 W (at 24 V DC)
43 W (at 48 V DC)
42 W (at 60 V DC)
55 W (at 110 V DC)
100 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching: when the gold layer is destroyed
Maximum switching voltage250 V AC/DC
Limiting continuous current6 A
Maximum inrush current8 A
Interrupting rating (ohmic load) max.120 W (at 24 V DC)
40 W (at 48 V DC)
35 W (at 60 V DC)
30 W (at 110 V DC)
55 W (at 220 V DC)
1500 VA (for 250 V AC)

Dimensions
Width20.8 mm
Height33 mm
Depth66.5 mm

Material specifications
Colorgreen (RAL 6021)

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 50 °C
Ambient temperature (storage/transport)-40 °C ... 70 °C

Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178

Mounting
Mounting typePlug-in mounting
Assembly notein rows with zero spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.