PHOENIX CONTACT OV-24DC/480AC/5 OV-24DC/480AC/5 2982650 PHOENIX CONTACT Semi-conductor relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

OV-24DC/480AC/5 2982650 PHOENIX CONTACT Semi-conductor relay

OV-24DC/480AC/5

2982650

PHOENIX CONTACT

10 Pcs.

Semi-conductor relay Solid-state relay, for signal amplification and galvanic separation of control and load circuits, pluggable into plug-in sockets for soldering SIM-AMS, or with card connection for direct mounting on the printed circuit board, input: 4-32 V DC, output: 12-530 V AC/5 A Solid-state relay, for signal amplification and isolation of the control and load circuits, can be plugged in the solderable plug-in bases SIM-AMS or with PCB connection for mounting directly onto the PCB, input: 4-32 V DC, output: 12-530 V AC/ 5 A

Automation > Optocoupler
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact OV-24DC/480AC/5 Semi-conductor relay provides reliable electronic switching for industrial automation controls and load circuits. Solid-state relays are commonly utilized in electrical panels to interface low-voltage control signals with higher-voltage AC loads, ensuring fast switching cycles and maintenance-free operation without mechanical wear. Exact pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Single solid-state relay
  • Operating mode: 100% operating factor
  • Data management status Date of last data management: 17.05.2024
  • Article revision: 00
  • Insulation characteristics Insulation: Basic insulation
  • Test voltage (Input/output): 4 kV (50 Hz, 1 min., input/output)
  • Nominal input voltage U N: 24 V DC
  • Input voltage range: 4 V DC ... 32 V DC
  • Switching threshold "0" signal, voltage: < 1.2 V DC
  • Switching threshold "1" signal voltage: > 3.5 V DC
  • Typical input current at U N: 10 mA
  • Typical response time: ms (maximum ½ periods)
  • Typical turn-off time: ms (maximum ½ periods)
  • Transmission frequency: 25 Hz
  • Design of digital output: electronic
  • Output voltage range: 12 V AC ... 530 V AC (45/65 Hz)

More info

▲
Technical data

Product properties
Product typeSingle solid-state relay
Operating mode100% operating factor
Data management status
Date of last data management17.05.2024
Article revision00
Insulation characteristics
InsulationBasic insulation

Electrical properties
Test voltage (Input/output)4 kV (50 Hz, 1 min., input/output)

Input data
Nominal input voltage UN24 V DC
Input voltage range4 V DC ... 32 V DC
Switching threshold "0" signal, voltage< 1.2 V DC
Switching threshold "1" signal voltage> 3.5 V DC
Typical input current at UN10 mA
Typical response timems (maximum ½ periods)
Typical turn-off timems (maximum ½ periods)
Transmission frequency25 Hz

Output data
Design of digital outputelectronic
Output voltage range12 V AC ... 530 V AC (45/65 Hz)
Limiting continuous current5 A (see derating curve)
Min. load current20 mA
Leakage current< 1 mA
Surge current80 A (tp = 20 ms)
Phase angle cos phi min0.5
Max. load value50 A2s
Peak offstate voltage1000 V (Periodic peak reverse voltage)
Voltage drop at max. limiting continuous current1.2 V
Output circuit2-conductor

Dimensions
Dimensional drawing
Width10.5 mm
Height43 mm
Depth25.4 mm

Material specifications
Colorblack (RAL 9005)

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-20 °C ... 70 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Approvals
UKCA
CertificateUKCA-compliant

Standards and regulations
Standards/regulationsEN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 55011

Mounting
Assembly noteCan be aligned with > 20 mm spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.