View larger
SACCBP-FS-12CON-M16/2,0-PVCSCO 1442191 PHOENIX CONTACT Flush-type connector
SACCBP-FS-12CON-M16/2,0-PVCSCO
1442191
PHOENIX CONTACT
1 Pcs.
Cables > Circular connector, mounting (with cable)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Serving as a SACCBP-FS-12CON-M16/2,0-PVCSCO Phoenix Contact Flush-type connector, this part provides a robust interface for panel-mounted sensor and control cabling in automated machinery. Such connectors bridge external wiring harnesses with internal control cabinets while maintaining required physical protection ratings.
Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Order information:: Lock nut is included in the scope of delivery
- Mounting type: Rear mounting M16 x 1.5 Thread with flat nut
- Assembly note: Thread with flat nut
- Product type: Circular connectors (device side)
- Sensor type: Universal
- Number of positions: 12
- No. of cable outlets: 1
- Shielded: yes
- Coding: A
- Thread type: M12
- Data management status Article revision: 09
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Flammability rating according to UL 94: V0
- Seal material: FKM
- Contact material: CuZn
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Order information: | Lock nut is included in the scope of delivery |
| Mounting type | Rear mounting M16 x 1.5 Thread with flat nut |
| Assembly note | Thread with flat nut |
| Product type | Circular connectors (device side) |
| Sensor type | Universal |
| Number of positions | 12 |
| No. of cable outlets | 1 |
| Shielded | yes |
| Coding | A |
| Thread type | M12 |
| Data management status | |
| Article revision | 09 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | V0 |
| Seal material | FKM |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Outer sheath, material | PVC |
| Conductor material | Tin-plated Cu litz wires |
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 30 V |
| Nominal current IN | 1.5 A |
| Max. conductor resistance | 142 Ω/km |
| Conductor connection | |
| Connection method | Cable connection |
| Contact connection type | Socket |
| Conductor cross section | 6x 2x 0.14 mm² |
| Tightening torque | 3 Nm ... 4 Nm (Installation-side) |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Connection 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | A |
| Connection 2 | |
| Head design | free cable end |
| Cable length | 2 m |
| Cable type | PVC black |
| Short symbol | PVC |
| Signal type/category | Universal |
| External cable diameter | 7.00 mm ±0.03 mm |
| Outer sheath, material | PVC |
| External sheath, color | black RAL 9005 |
| Wire diameter incl. insulation | 1 mm ±0.05 mm |
| Single wire, color | white-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/blue |
| Cable cross section | 6x 2x 0.14 mm² |
| Material, inner sheath | PVC |
| Conductor material | Tin-plated Cu litz wires |
| Conductor structure signal line | 18x 0.10 mm |
| Material wire insulation | PVC |
| Thickness, insulation | 0.21 mm |
| Overall twist | Six pairs around the filler to the core |
| Shielding | Tinned copper braided shield |
| Optical shield covering | 85 % |
| Nominal voltage, cable | 300 V |
| Test voltage, cable | 1500 V AC |
| Cable resistance | 142 Ω/km (at 20 °C) |
| Smallest bending radius, fixed installation | 42 mm |
| Smallest bending radius, movable installation | 105 mm |
| Resistance to oil | in accordance with DIN EN 60811-404 |
| Flame resistance | IEC 60332-1-2, IEC 60332-1, FT1, VW-1 |
| Other resistance | Hydrolysis and microbe resistant as per VDE 0282 section 10 |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| -25 °C ... 85 °C (Cable, flexible installation) |
| Ambient conditions | |
| Degree of protection | IP67 (When plugged in) |
| IP65 (When plugged in) | |
| IP65/IP67 | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 85 °C (Cable, flexible installation) | |
| -40 °C ... 85 °C (cable, fixed installation) | |
| Resistance to oil | in accordance with DIN EN 60811-404 |
| Flame resistance | IEC 60332-1-2, IEC 60332-1, FT1, VW-1 |
| Resistance to oil | in accordance with DIN EN 60811-404 |
| Other resistance | Hydrolysis and microbe resistant as per VDE 0282 section 10 |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |