PHOENIX CONTACT SACC-DSI-M12FS-8CON-PG9/0,5 VA SACC-DSI-M12FS-8CON-PG9/0,5 VA 1554720 PHOENIX CONTACT Panel feed-through View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-DSI-M12FS-8CON-PG9/0,5 VA 1554720 PHOENIX CONTACT Panel feed-through

SACC-DSI-M12FS-8CON-PG9/0,5 VA

1554720

PHOENIX CONTACT

1 Pcs.

Panel feed-through Conect. plug. to be apar. wall poster., Universal, 8-pole, Female built-in mounting, straight, M12-Standard, coding: A, free cable end, Rear mounting, Pg9, Single stranded wires, cable length: 0.5 m, 0.25 mm², TPE braided wire, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) item code: 1240042 Device connector rear mounting, Universal, 8-position, Socket, straight, M12-Standard, coding: A, on free cable end, Rear mounting, Pg9, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1240042

Cables > Circular connector, mounting (with cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact model SACC-DSI-M12FS-8CON-PG9/0,5 VA (1554720) is a panel feed-through designed to provide a secure transition point for control signals passing through enclosure walls. Industrial bulkhead interfaces allow structured cable management and simplify device replacement during maintenance cycles. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Order information:: Lock nut is included in the scope of delivery
  • General: Contact connection method: Crimp connection
  • Mounting type: Rear mounting Pg9 With locking nut
  • Assembly note: With locking nut
  • Product type: Circular connectors (device side)
  • Sensor type: Universal
  • Number of positions: 8
  • No. of cable outlets: 1
  • Shielded: no
  • Coding: A
  • Thread type: M12
  • Data management status Article revision: 08
  • Insulation characteristics Overvoltage category: II
  • Degree of pollution: 3
  • Flammability rating according to UL 94: V0
  • Seal material: FKM

More info

▲
Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery
GeneralContact connection method: Crimp connection

Mounting
Mounting typeRear mounting Pg9 With locking nut
Assembly noteWith locking nut

Product properties
Product typeCircular connectors (device side)
Sensor typeUniversal
Number of positions8
No. of cable outlets1
Shieldedno
CodingA
Thread typeM12
Data management status
Article revision08
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionStainless steel
Conductor materialTin-plated Cu litz wires

Electrical properties
Rated surge voltage0.8 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V (AC)
30 V (DC)
Nominal current IN2 A
Max. conductor resistance80 Ω/km

Connection data
Conductor connection
Connection methodIndividual wires
Contact connection typeSocket
Conductor cross section0.25 mm²
Tightening torque2 Nm ... 3 Nm (Installation-side)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
Head locking typeStandard
CodingA
Connection 2
Head designfree cable end

Cable/line
Cable length0.5 m
Cable typeTPE litz wire
Signal type/categoryUniversal
Wire diameter incl. insulation1.15 mm ±0.07 mm
Single wire, colorbrown, blue, white, gray, pink, green, yellow, red
Cable cross section0.25 mm²
Conductor materialTin-plated Cu litz wires
Conductor structure signal line14x 0.15 mm
AWG signal line24
Material wire insulationTPE
Thickness, insulation0.21 mm
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Cable resistance≤ 80 Ω/km
Cable insulation resistance≥ 20 MΩ*km
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP65/IP67/IP69/IP69K
IP65/IP67/IP69K
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)

Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.