View larger
SACC-DSI-FSD-4CON-L180/SH TQ 1456527 PHOENIX CONTACT Flush-type connector
SACC-DSI-FSD-4CON-L180/SH TQ
1456527
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact SACC-DSI-FSD-4CON-L180/SH TQ 1456527 flush-type connector is designed for secure panel integration within automated control architectures. Flush-type connectors establish reliable signal and data transfer pathways through enclosure walls, linking internal board assemblies with external cabling networks. Specific pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Type of plug-in contact, outer side (EF005528): Female (bus)
- Number of poles (EF001391): 4
- Number of control contacts (EF012217): 4
- With PE-connection (EF005600): No
- Material of contact surface (EF004020): Nickel
- Pollution degree (EF006786): 3
- Min. number of insertion cycles (EF012212): 100
- Degree of protection (IP), mounted (EF007466): IP67
- Operating temperature (EF002393): -40 °C
- Rated current In (EF008250): 4 A
More info
▲Key Commercial Data
| Orderkey | 1456527 |
|---|---|
| Packing unit | 20 pc |
| Minimum order quantity | 20 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 90 (C-2-2013) |
| GTIN | 4046356617185 |
| Weight per Piece (excluding packing) | 14.210 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C (cable, fixed installation) |
|---|---|
| Degree of protection | IP67 |
General
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Rated current at 40°C | 4 A |
| Rated voltage | 250 V |
| Rated surge voltage | 2.5 kV |
| Number of positions | 4 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | D - data |
| Standards/regulations | M12 connector IEC 61076-2-101 |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder pins |
| Insertion/withdrawal cycles | ≥ 100 |
| Torque | 3 Nm ... 4 Nm (Installation-side) |
| Mounting type | Rear mounting Pg9 With flat nut |
Material
| Flammability rating according to UL 94 | V0 |
|---|---|
| Contact material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | Zinc die-cast, nickel-plated |
| Sealing material | NBR |
Cable
| Standards/specifications | M12 connector IEC 61076-2-101 |
|---|---|
| Transmission characteristics (category) | CAT5 (IEC 11801:2002) |
Standards and Regulations
| Standard designation | M12 connector |
|---|---|
| Standards/regulations | IEC 61076-2-101 |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |