View larger
SACC-DSI-FSD-4CON-L180/12 SCO 1552272 PHOENIX CONTACT Bus system flat-type plug
SACC-DSI-FSD-4CON-L180/12 SCO
1552272
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Integrating bus communication networks into industrial enclosures is simplified using the Phoenix Contact SACC-DSI-FSD-4CON-L180/12 SCO bus system flat-type plug. Standardized panel connectors provide robust connection points for fieldbus cabling, ensuring uninterrupted data flow across automated systems. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Type of plug-in contact, outer side (EF005528): Female (bus)
- Mounting method (EF000003): Back wall mounting
- Screw-in thread (EF012303): PG9
- With shield connection (EF002535): No
- Number of poles (EF001391): 4
- Number of control contacts (EF012217): 4
- With PE-connection (EF005600): No
- Coating housing (EF001601): Nickel-plated
- Min. number of insertion cycles (EF012212): 100
- Degree of protection (IP), mounted (EF007466): IP65/IP67
- Ambient temperature (EF002386): 85 °C
- Operating temperature (EF002393): -25 °C
- Rated current In (EF008250): 4 A
- With thread (EF003723): Yes
More info
▲Key Commercial Data
| Orderkey | 1552272 |
|---|---|
| Packing unit | 20 pc |
| Minimum order quantity | 20 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 246 (C-2-2013) |
| GTIN | 4046356162128 |
| Weight per Piece (excluding packing) | 13.710 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
|---|---|
| -40 °C ... 85 °C (without mechanical actuation) | |
| Degree of protection | IP67 |
General
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Rated current at 40°C | 4 A |
| Rated voltage | 250 V |
| Rated surge voltage | 2.5 kV |
| Number of positions | 4 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | D - data |
| Standards/regulations | M12 connector IEC 61076-2-101 |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder pins |
| Insertion/withdrawal cycles | > 100 |
| Torque | 3 Nm ... 4 Nm (Installation-side) |
| Mounting type | Rear mounting Pg9 With flat nut |
Material
| Flammability rating according to UL 94 | V0 |
|---|---|
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | Zinc die-cast, nickel-plated |
| Sealing material | NBR |
Standards and Regulations
| Standard designation | M12 connector |
|---|---|
| Standards/regulations | IEC 61076-2-101 |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |